Advertisement
3.
Fix the mounting bracket to the surface (wall or ceiling).
4. Assemble the heater mounting mechanism as shown in the Heater Mounting section.
5. Install the heater on the bracket using the guides on the back of the housing . When
mounting the heater on a vertical surface, ensure that the Control Module is in the correct
position (page 8)
6. Connect the heater to a power supply in accordance with local electrical and fire safety
requirements.
Heater mounting:
MountingBracket
WingNut
Screw
Screw
Channel Tightening Screws
Channel Bracket
Finishedmounting hardware
Wall installationof the infrared
heater
Correct position of the heater
on a vertical surface (wall)
for Torrid series models
vertical placement
horizontal placement
6
Advertisement
