Related Manuals for RADtec T4000/8r
Summary of Contents for RADtec T4000/8r
- Page 1 OPERATING MANUAL INFRARED RADIANT HEATER: TORRID SERIES T4000/8r & T4000/12r 220 VOLT T4000/8r - 34 inches T4000/12r - 50 inches...
- Page 2 Table of contents Description of heaters ________________________________________3 Advantages of heaters________________________________________4 Characteristics of the T4000____________________________________4 Package____________________________________________________ 5 Heater device (fig. 1)__________________________________________5 Heater fixing procedure_______________________________________5 Heater fastening mechanism___________________________________6 Heater Connection Requirements_______________________________7 Safety warnings _____________________________________________7 Heater maintenance __________________________________________7 Limited Warranty ____________________________________________8...
- Page 3 It is also possible to place this heater on a mobile stand (not included, purchased separately). RADtec state-of-the-art infrared heaters use high efficiency heating elements. 95% or more of the electrical power consumed is converted into a heat flux. Infrared heating achieves this efficiency by heating objects in the area without having to heat the surrounding air.
- Page 4 Advantages of RADtec heaters • Wide range of applications • Eco-friendly, safe for humans and animals • Remote controlled • Instant heat • High efficiency • 2-yr warranty • First heater with IP67 certification Characteristics of Torrid Series Models Product ID...
- Page 5 Equipment • Packaging containers - 1 pc. • Heater with power cable and plug - 1 pc. • Remote control (with power supply - 2 pcs., Type AAA battery) - 1 pc. * * (for r series models) • Fasteners - set. •...
- Page 6 Fix the mounting bracket to the surface (wall or ceiling). 4. Assemble the heater mounting mechanism as shown in the Heater Mounting section. 5. Install the heater on the bracket using the guides on the back of the housing . When mounting the heater on a vertical surface, ensure that the Control Module is in the correct position (page 8) 6.
- Page 7 Heater Connection Requirements 1. The heater is 220-240 volts. 2. The heater (s) are connected to a separate line with a dedicated circuit breaker with a current cut-off rating corresponding to the power of the heater (s). 3. Consult a licensed electrician for installation. WARNING: Do not use extension cords as they are not designed to power outdoor heaters.
Need help?
Do you have a question about the T4000/8r and is the answer not in the manual?
Questions and answers