Advertisement
Available languages
Available languages
NOTE
After inserting the panel, check it with
bare eyes.
If the panel is not correctly inserted, or
the gaps are not even in all four corners,
reinstall the panel.
Reinstallation
Remove the screws on both sides of the
door. Then, put the suction cups on the
panel, one in the top left area of the panel
and the other in the top right. Pull up the
handles of the suction cups to remove the
panel, then install the panel again.
CAUTION
• Using the cups in the center area may
bend the panel. Make sure to put the
suction cups in the top left and top right
areas of the panel. Then, pull up the
handle just once for each.
• Make sure the door is secured and
stable before using the suction cups.
DW5000C_DW80CB507012AA_DD68-00260A-00_EN.indd 19
DW5000C_DW80CB507012AA_DD68-00260A-00_EN.indd 19
English 19
2023-05-03
2023-05-03
11:50:03
11:50:03
Advertisement
