Table of Contents
Advertisement
Use the On-Screen Display (OSD) Control
When adjusting the settings, you can view the user controls through the OSD.
Use controls:
1. Press
to open the OSD Main Menu.
2. Use ∧ or ∨ to move between icons. Select an icon and press
submenu, use ∧ or ∧ to move between options, and then press
make adjustments, and then press
3. Press
to exit the submenu in sequence, and then exit the OSD.
4. When OSD is not displayed, press
prevent accidental adjustment of the OSD. Press
adjustment.
5. DDC/CI is enabled by default. Press
function. The message "DDC/CI disable (DDC/CI enable)" is displayed on the screen.
ENERGY STAR is a consumer electronics energy efficiency program led by the U.S. government. It was
launched at the Department of Energy to reduce energy consumption and greenhouse gas emissions. The
ENERGY STAR logo is a symbol of energy efficiency and environmental protection. It has improved the
concept of energy efficiency among consumers and manufacturers, and effectively guided the market. The
"ENERGY STAR Regulations" improve energy efficiency and reduce air pollution through the use of more
energy-efficient equipment in homes, offices, and factories. One way to achieve this goal is to use
management to reduce energy consumption when products are not in use. The default settings of the monitor
are ENERGY STAR qualified. Any changes made by the user to more features and functions can increase
power consumption, which would exceed the limits of the ENERGY STAR standard. If the user changes
options related to energy efficiency while in use, such as brightness, color mode, etc., selecting Reset
Factory All or selecting the ENERGY STAR option will restore energy consumption to ENERGY STAR-
compliant energy efficiency.
For more information, see (www.enercystar.gov/products). All ENERGY STAR products will be posted
online and directly accessible to governments, public agencies, and consumers.
to save.
and hold for 10 seconds to lock the OSD. In this way, you can
and hold for 10 seconds to unlock the OSD for OSD
and hold for 10 seconds to disable/enable the DDC/CI
to access the feature. If there is a
to select the feature. Use ∧ or ∨ to
Chapter 2. Adjusting and Using the Display 2-4
Advertisement
Table of Contents
