Using The Timer Programming Feature - Samsung CHT-250 Instruction Manual

Using the Timer Programming Feature

The Timer Programming feature allows you to preset the DVD-
VCR to record a programme up to one month before that
programme is to be broadcast. Up to six programmes can be
preset.
Before presetting a recording, check that the date and
time are correct.
1
Insert the cassette and press TIMER on the remote control.
Result: The
TIMER PROGRAMMING
2 Press ❿ to select the input source.
3
Select the required station by pressing the
INPUT SEL. to select the LINE input sources.
4 Press ❿ to select the recording day.
5
Select the required day by pressing the
6 Press ❿ to select the recording start time.
7
Select the required hour value by pressing the
8 Press ❿ to select the minutes.
9
Select the required minute value by pressing the
buttons.
10 Press ❿ to select the recording stop time.
11
Select the required recording stop time by pressing the
buttons, following the same procedure as when selecting the
recording start time.
12 Press ❿ to select the recording speed.
13
Press the or buttons to select the
❷
(Long Play), Auto
14
When you have finished, press the RETURN button.
15
Press the STANDBY/ON button to activate the timer.
Result: Before starting recording, the DVD-VCR compares
the timer duration with the remaining time on the
cassette.
Auto Tape Speed Select. The DVD-VCR's "Auto Tape
Speed Select" function compares the duration of the
timer recording to the actual recording time remaining
on the tape loaded. If there is insufficient tape to
complete a timer recording in AUTO mode, the DVD-
VCR automatically switches to LP mode to record the
whole programme.
is displayed.
,
❷
or
❷
SP (Standard Play),
(Auto Tape Speed Select) recording speeds.
buttons or
buttons.
or buttons.
❷
or
❷
or
❷
LP
VCR
15
33
GB