Selecting A Supported Display Mode - Lenovo L24e-40 User Manual

Selecting a supported display mode

The display mode of the monitor uses is controlled by the computer� Therefore, refer to your
computer documentation on how to change display modes�
The image size, position and shape might be changed when the display mode changes� This is
normal and the image can be re-adjusted using automatic image setup and the image controls�
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel
technology is inherently flicker-free�
Note: If your system has previously been used with a CRT monitor and is currently configured
to a display mode outside the range of this monitor, you may need to reattach the CRT monitor
temporarily until you have re-configured the system; preferably to 1920 x 1080 at 100 Hz, which
is a common display mode�
The display modes shown below have been optimized at the factory�
Table 2-2. Factory set display modes
Address ability
720x400
640x480
720x480
720x576
800x600
832x624
1024x768
1280x720
1280x1024
1440x900
1600x900
1680x1050
1152x864
1366x768
1920x1080
480p
576p
720p
1080p
Refresh rate
70 Hz
60 Hz,72 Hz,75 Hz
60 Hz
50 Hz
56 Hz,60 Hz,72 Hz,75 Hz
75 Hz
60 Hz,70 Hz,75 Hz
50 Hz,60 Hz
60 Hz,70 Hz,75 Hz
60 Hz
60 Hz,75 Hz
60 Hz
75 Hz
60 Hz
50 Hz,60 Hz,75 Hz,100 Hz
60 Hz
50 Hz
50 Hz,60 Hz
50 Hz,60 Hz
Chapter 2� Adjusting and Using your monitor 2-5