Page 1
Mohit NAME NAME KNG: KNG-2208-0003 EN Electric Garden Blower Vacuum 2800W MBV2800 5063022106285 EN ORIGINAL INSTRUCTIONS 5063022114020 IMPORTANT - These instructions are for your safety. Please read through them thoroughly prior to handling TTBV2800 the product and retain them for future reference.
Page 2
EN Parts 01. x1 02. x1 03. x1 04. x1 05. x1 06. x1 EN You will need EN Contents Product description Safety Technical specification Before you start Functions & Settings Operation Care and maintenance Guarantee Declaration of conformity 5063022106285_MNL_IN_V03.indd 2 5063022106285_MNL_IN_V03.indd 2 30-03-2023 23:58:18 30-03-2023 23:58:18...
Page 3
EN Product description 1. Main handle 8. Flat vacuum tube 14. Locking knob a. Hanging hole a. Guide roller (x2) 15. Air vents 2. Speed dial b. Clip* (x2) 16. On/off switch 3. Front handle c. Flat nozzle* a. Locking knob 9.
EN Safety General power tool safety warnings WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Page 6
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. h) Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles.
Page 7
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. h) Keep handles and grasping surfaces dry, clean and free from oil and grease.
d) Do not wear loose clothing or jewellery that can be drawn into the air inlet. Keep long hair away from the air inlets. e) Operate the product in a recommended position and only on a firm, level surface. Do not operate the product on a paved or gravel surface where ejected material could cause injury.
Page 9
g) Always stand clear of the discharge zone when operating this product. h) When feeding material into the product be extremely careful that pieces of metal, rocks, bottles, cans or other foreign objects are not included. If the cutting mechanism strikes any foreign objects or if the product should start making any unusual noise or vibration, immediately shut off the power source and allow the product to stop.
Walk, never run, when using this product. s) Keep all cooling air inlets clear of debris. Never blow debris in the direction of bystanders. u) Do not tilt the product while the power source is running. Recommendations for operation a) Operate the product only at reasonable hours - not early in the morning or late at night when people might be disturbed.
h) Replace worn or damaged parts for safety. Use only genuine replacement parts and accessories. Never attempt to override the interlocked feature of the guard. When not in use, store the product in a dry place out of the reach of children. k) If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in order to avoid a safety hazard.
If the product starts to vibrate abnormally, check it immediately. Excessive vibration can cause injury. m) Always ensure the product is fully assembled before using it. Never attempt to use an incomplete product or one fitted with an unauthorised modification. n) Check the suction/blowing device regularly for damage, and if damaged repair immediately.
Emergency Familiarise yourself with the use of this product by means of this instruction manual. Memorise the safety directions and follow them to the letter. This will help to prevent risks and hazards. 1. Always be alert when using this product, so that you can recognise and handle risks early.
Page 14
Symbols On the product, the rating label and within these instructions you will find among others the following symbols and abbreviations. Familiarise yourself with them to reduce hazards like personal injuries and damage to property. Volt, (alternating voltage) Hertz Watt Per hour /min or min Per minute...
Page 15
Wear tight-fitted protective clothes. Switch the product off and disconnect it from the power supply before assembly, cleaning, adjustments, maintenance, storage and transportation. This product is of protection class II. That means it is equipped with enhanced or double insulation. Do not expose the product to rain or wet conditions (moisture).
Page 16
Rating label explanation Garden Blower Vacuum: MBV2800 TTBV2800 M = Brand name (MAC Allister) TT = Brand name (TITAN) BV = Blower Vacuum 2800 = Rated input (W) EN Technical specifications General : > Rated voltage, frequency : 230-240 V~, 50 Hz >...
Page 17
WARNING! The vibration and noise emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used especially what kind of workpiece is processed; The need to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
NOTE: Take care of small parts that are removed during assembly or when making adjustments. Keep them secure to avoid loss. Tube assembly WARNING! Once the tube has been completely assembled it may not be disassembled or removed from the main unit (11)! Contact a qualified specialist if the tube needs to be disassembled, e.g.
Page 19
Fig. 2 WARNING! Always operate the product with its collection bag (9) attached to protect yourself against flying debris and to avoid injuries! Do not use this product with a damaged collection bag or without one at all! Harness WARNING! Always use the product with the harness (10)! Do not carry it only with your hands! Always adjust the harness (10) before operation.
Page 20
3. Attach the securing clip (10a) to the hanging hole (1a) on the main handle (1) (Fig. 4). 4. Ensure the position of the product is comfortable and it is properly balanced. 5. In case of emergency press two clips of the quick release (10b). The product together with the securing clip (10a) will be released automatically from the body because of the weight of the product (Fig.
4. Your product is now ready to be used. EN Functions & Settings Intended use This electric blower vacuum MBV2800 / TTBV2800 is designated with a rated input of 2800 Watts. The product is intended for: • blowing dry leaf material to pile it up ready for collection or to blow similar material out of areas which are hard to reach.
2. Turn the locking knob (3a) clockwise to tighten the front handle (3) (Fig. 7, step 3). Ensure the tooth system locks in place. Mode selector WARNING! Always switch off the product and let it come to a complete stop before changing the operating mode! Select the operating mode by moving the mode selector to the respective symbol (Fig.
WARNING! The motor / fan will continue to run for some time even after the motor has been switched off! Wait until it comes to a complete stop before putting the product down! Speed dial Limit the maximum speed using the speed dial (2). The speed is continuously adjustable with the following levels: 1.
Page 24
10. Do not blow any solid bodies such as stones, branches or pieces of branch, fir cones or similar. 11. We recommend slightly dampening surfaces in dusty conditions or using a mister attachment. Operating hours Only operate the product at reasonable hours - not early in the morning, late at night or on weekends / public holidays when people might be disturbed.
Fig. 12 4. For using the flat nozzle (8c): Attach the flat vacuum tube (8) as mentioned in the “Assembly-> Flat vacuum tube” section and use the guide rollers (8a) to guide the flat nozzle (8c) along the ground to collect leaves.
NOTE: Do not use chemical, alkaline, abrasive or other aggressive detergents or disinfectants to clean this product as they might be harmful to its surfaces. 4. Check for any damage and wear. Repair damage in accordance with this instruction manual or take it to an authorised service centre before using the product again.
Power cord If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a safety hazard. UK plug (for UK only) If you need to replace the fitted plug, then follow the instructions below. IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue - Neutral...
3. Store the product and its accessories in a dark, dry, frost-free, well-ventilated place. 4. Always store the product in a place that is inaccessible to children. The ideal storage temperature is between 10 °C and 30 °C. 5. We recommend using the original package for storage or covering the product with a suitable cloth or enclosure to protect it against dust.
Recycling and disposal Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. For further information visit www.recycle-more.co.uk. The product comes in a package that protects it against damage during shipping. Keep the package until you are sure that all parts have been delivered and the product is working properly.
Page 30
A better way to repair your tools Kingfisher takes special care in creating high-quality garden power tools that are designed to last. But if a fault develops with your garden power tool and you need to claim under the guarantee, the Customer Care and Technical Helpline can support with technical assistance or if required, arrange a free courier collection from your home, assess your garden power tool for fault, repair it, and return it.
Page 31
Manufacturer: EN www.diy.com www.screwfix.com UK Manufacturer: www.screwfix.ie Kingfisher International Products Limited, To view instruction manuals online, 1 Paddington Square, London, W2 1GG, visit www.kingfisher.com/products United Kingdom EU Manufacturer: Kingfisher International Products B.V. Rapenburgerstraat 175E 1011 VM Amsterdam The Netherlands 5063022106285_MNL_IN_V03.indd 31 5063022106285_MNL_IN_V03.indd 31...
Need help?
Do you have a question about the MBV2800 and is the answer not in the manual?
Questions and answers