Table of Contents
Advertisement
Section 3 - Configuration
If you clicked on Edit or Add Rule, the following options will appear:
Name
Enter a name for the rule. Alternatively, select the protocol/
Application Name from the drop-down menu.
Local IP
Enter the IP address of the computer on your local network
that you want to allow the incoming service to. Alternatively,
select the device from the drop-down menu.
Protocol
Select the protocol of the traffic to allow or deny (TCP, UDP,
Both, or Other).
Protocol Number
If you entered Other above, enter the protocol number.
External Port
Enter the public port you want to open.
Internal Port
Enter the private port you want to open.
Schedule
Use the drop-down menu to select the time schedule that
the rule will be enabled for. The schedule may be set to
Always Enable, or you can create your own schedules in the
Schedules section. Refer to Time & Schedule - Schedule on
page 87 for more information.
D-Link DIR-X6060 User Manual
79
Advertisement
Table of Contents
