D-Link EXO DIR-X6060 User Manual page 65

Section 3 - Configuration
2.4GHz / 5GHz - Advanced Settings...
Security Mode Choose None or WPA/WPA2-Personal (recommended).
802.11 Mode (2.4GHz) Select the desired wireless networking standards to use.
The available options for the 2.4 GHz wireless network
are Mixed 802.11b/g/n/ax, Mixed 802.11b/g/n, Mixed
802.11g/n, or 802.11n only.
802.11 Mode (5GHz) Select the desired wireless networking standards to use.
The available options for the 5 GHz wireless network are Mixed
802.11a/n/ac/ax, Mixed 802.11a/n/ac, Mixed 802.11n/ac,
Mixed 802.11a/n, 802.11ac only, Mixed 802.11a only, or
802.11n only.
Wi-Fi Channel Select the desired channel. The default is Auto (recommended).
Transmission Power Select the desired wireless transmission power.
Channel Width A higher channel width allows for faster data transmission, at
the possible expense of wireless coverage and compatibility
with older wireless clients. Select the optimum channel width
for your wireless network from the drop-down menu.
HT20/40 Coexistence Enable or disable HT20/40 Coexistence.
(2.4GHz)
Visibility Status The default setting is Visible. Select Invisible if you do not
want to broadcast the SSID of your wireless network.
Schedule
Use the drop-down menu to select the time schedule that
the rule will be enabled for. The schedule may be set to
Always Enable, or you can create your own schedules in the
Schedules section. Refer to Time & Schedule - Schedule on
page 87 for more information.
D-Link DIR-X6060 User Manual 60