1MRK500129-UEN Rev. J
22
Communication port
23
Programmable indication LEDs
24
IED status LEDs
Object control
If the control position of the IED is set to local with the R/L button, the controlled objects can be
opened and closed using the object control buttons.
Object to be controlled is selected from the single line diagram.
Table 6:
Name
Close
Open
Navigation
The arrow buttons are used for navigation. To scroll information, press the arrow button several times
or simply keep it pressed down.
Table 7:
Name
ESC
Enter
Up
Down
Left
Right
Key
670/650 series
Quick start guide
Object control push-buttons
Description
Closing the object.
The LED indicates the current object state.
Opening the object.
The LED indicates the current object state.
Navigation push-buttons
Description
•
Leaving setting mode without saving the values.
•
Cancelling certain actions.
•
Adjusting the display contrast in combination with
•
Running the display test in combination with
•
Deleting a character in combination with
•
Inserting a space in combination with
•
Entering parameter setting mode.
•
Confirming a new value of a setting parameter.
•
Confirming selection in dialogs and alarm panel.
•
Moving up and down in menus.
•
Selecting objects in the SLD.
•
Moving selection in dialogs and alarm panel.
•
Scrolling active digits of a parameter when entering a new setting value.
•
Moving left and right in menus.
•
Selecting pages in the SLD.
•
Changing the active digit of a parameter when entering a new setting value.
•
Activating the authorization procedure, when the user is not logged in.
•
Logging out, when the user is currently logged in.
© 2018 - 2023 Hitachi Energy. All rights reserved.
or
.
.
when editing a string.
when editing a string.
Section 6
LHMI overview
25