Automatic Fault Warnings And What To Do - Kernau KFD 8503 Manual

8. AUTOMATIC FAULT WARNINGS AND WHAT TO DO

Your tumble dryer is equipped with a built-in fault detection system, indicated by
a combination of flashing operation lights. The most common failure codes are shown
below.
ERROR CODE
E03 /
E04
E05
E06
E07
E08
• The installation and repairing procedures should always carried out by the
Authorised Service Agent in order to avoid possible risks.
• The manufacturer shall not be held liable for damages that may arise from
procedures carried out by unauthorised persons.
• Repairs may be carried out by technicians only.
• If a component has to be replaced, ensure that only original spare parts are used.
• Improper repairs or use of non-original spare parts may cause considerable damage
and put the user at considerable risk.
• Contact information for your customer service can be found on the back of this
document.
• Function-relevant genuine spare parts according to the corresponding Ecodesign
order can be obtained from Customer Service for a period of at least 10 years from
the date on which your appliance was placed on the market within the European
Economic Area.
Empty the water tank, if problem does not solved, contact the
nearest authorised service agent.
Contact the nearest authorised service agent.
Contact the nearest authorised service agent.
Contact the nearest authorised service agent.
Contact the nearest authorised service agent.
There may be voltage fluctuation in mains.Wait until voltage is
appropriate for working range.
Customer service
PL: +48 22 243 70 00
Mon 7:00 - 17:00
Tue-Fri 9:00 - 17:00
kontakt@kernau.com
SOLUTION
EN 66