Table of Contents
Related Manuals for Fast Mover FMT3006
Summary of Contents for Fast Mover FMT3006
- Page 1 FMT3006_Product Instructions 18/06/2013 11:02 Page 1 FMT3006 LVLP Gravity Spraygun Product Instruction Manual PLEASE KEEP THIS MANUAL SAFE FOR FUTURE REFERENCE +44 (0)1582 661993 +44 (0)1582 667100 sales@fastmovertoolsuk.com...
-
Page 2: Specification
FMT3006 Instruction Manual IMPORTANT Please read through this Manual carefully before using the FMT3006. This tool must only be used for spraying and within the parameters outlined in this manual. All users of the equipment should be trained in any risks associated with the products they are spraying or using as spraying and finishing aids. - Page 3 Repairs carried out by unauthorised repair agents will invalidate the warranty unless you have been given specific permission by Fast Mover Tools on a case by case basis only. Do not use this tools whilst under the influence of drugs, alcohol or intoxicating Fast Mover Tools Limited T: 01582 661993 F: 01582 667100 E: sales@fastmovertoolsuk.com...
- Page 4 Keep the nozzle 200-300mm from the surface and spray evenly from side to side or up and down. Spraying at an angle will lead to paint runs. Use smooth, even strokes. When spraying large Fast Mover Tools Limited T: 01582 661993 F: 01582 667100 E: sales@fastmovertoolsuk.com...
-
Page 5: Maintenance
- Clean other sections of the gun with the brush soaked in thinner or with a waste cloth. - Always change to air cap, fluid nozzle and needle as a matched set. - Lightly lube all moving parts with a non-petroleum based lubricant. Fast Mover Tools Limited T: 01582 661993 F: 01582 667100 E: sales@fastmovertoolsuk.com W: www.fastmovertoolsuk.com... -
Page 6: Troubleshooting
2 Adjust fluid or pattern knobs Heavy centre spray pattern 1 Paint viscosity too high 1 Adjust viscosity of paint 2 Fluid output too low 2 Increase fluid output Fast Mover Tools Limited T: 01582 661993 F: 01582 667100 E: sales@fastmovertoolsuk.com W: www.fastmovertoolsuk.com... -
Page 7: Parts Diagram
Air Valve Seat 1 O-Ring Air Piston Complete Air Piston Spring Air Valve Assembly Bushing O-Ring Gasket Hold Nut Adjustment Dial Screw Air Inlet Fitting Fan Control Gasket Fast Mover Tools Limited T: 01582 661993 F: 01582 667100 E: sales@fastmovertoolsuk.com W: www.fastmovertoolsuk.com... -
Page 8: Warranty
Always dispose of tools in accordance with local authority guidelines. © 2012 Fast Mover Tools. This document is copyright and is not to be copied, circulated, distributed or shown to anyone other than the intended recipient without the express permission of Fast Mover Tools.