Use of dust collection can re- such as in the presence of flammable liquids, gases or duce dust-related hazards. dust. Power tools create sparks which may ignite the dust or fumes. 2 609 932 811 | (22.11.11) Bosch Power Tools...
Battery tool use and care Use the battery only in conjunction with your Bosch Recharge only with the charger specified by the manu- power tool. This measure alone protects the battery facturer.
An estimation of the level of exposure to vibration should also Robert Bosch GmbH, Power Tools Division take into account the times when the tool is switched off or D-70745 Leinfelden-Echterdingen 18.11.2011...
There is danger of injury when unintentionally actuating Use only original Bosch carbide blades (TC). the On/Off switch. The carbide blade (TC) has 2 cutting edges and can be re- Battery Charging (see figure A) versed.
3.0 – 5.5 Inserting the Battery Use only original Bosch lithium ion batteries with the Planing with Parallel/Beveling Guide (see figure G–I) voltage listed on the nameplate of your power tool. Us- Mount the parallel guide 21 or beveling guide 25 to the ma- ing other batteries can lead to injuries and pose a fire haz- chine using the corresponding fastening bolt 24.
Phone: +64 (0800) 543 353 When the battery is no longer operative, please refer to an au- Fax: +64 (0800) 428 570 thorised after-sales service agent for Bosch power tools. Outside AU and NZ: Phone: +61 (03) 9541 5555 If the machine should fail despite the care taken in manufac- www.bosch.com.au...