Nokia TA-1027 Get Started

Get started
Nokia 5
TA-1027/TA-1044 EN 1.0
1. Insert the SIM and memory
card
1. Open the SIM tray and memory card tray by
putting the provided tray opener into the holes
next to the trays.
2. Put the nano-SIM into the slot 1 located on the
tray with the contact area face down. If you have
a second SIM, put it into the slot 2. If you have a
memory card, put the card into the slot located on
the memory card tray.
3. Slide the SIM and memory card trays back into
the slots.
Use only original nano-SIM cards. Use of
incompatible SIM cards may damage the card or the
device, and may corrupt data stored on the card.
XXXXXXXXXXX
Main camera
Charger connector
Loudspeaker
Microphone
2. Charge the battery and switch
Audio connector
Microphone
SIM cards
MicroSD card
Home
your phone on
Plug a compatible charger into a wall outlet, and
connect the cable to your phone. Your phone
supports the USB micro-B cable. You can also
charge your phone from a computer with a USB
cable, but it may take a longer time.
If the battery is completely discharged, it may take
several minutes before the charging indicator is
displayed.
To switch your phone on, press and hold the power
key until the phone vibrates. The phone guides
you through the setup.
USB micro-B USB-C
Front camera
Earpiece
Volume keys
Power/Lock key
3. Learn more about your new
Nokia
For a printable user guide, online user guide, and
troubleshooting help, go to www.nokia.com/
phones