Table of Contents
Advertisement
Setting Up the Audio Options
DTS
1. Off : Doesn't output digital signal.
2. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
Note There is no analog audio output when you play
DTS sound disc.
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
PCM Down Sampling
1. On : Select this when the amplifier connected to the
player is not 96KHz compatible. In this case, the
96KHz signals will be down converted to 48KHZ.
2. Off : Select this when the amplifier connected to the
player is 96KHz compatible. In this case, all
signals will be output without any changes.
Note
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
• Manufactured under license from Dolby
Laboratories. "Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.
• "DTS" and "DTS Digital Out" are trademarks of
Digital Theater Systems, Inc.
Setting Up the Display Options
1. With the unit in Stop mode, press the MENU button.
2. Select Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3. Select Display Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
4. Use the UP/DOWN buttons to select the desired
item. Then press the RIGHT or ENTER button.
TV Aspect
Depending on a type of television you have, you may
want to adjust the screen setting (aspect ratio).
1. 4:3 Letter Box : Select when you want to see the total
16:9 ratio screen DVD supplies, even though you
have a TV with a 4:3 ratio screen. Black bars will
appear at the top and bottom of the screen.
2. 4:3 Pan Scan : Select this for conventional size TVs
when you want to see the central portion of the 16:9
screen. (Extreme left and right side of movie picture
will be cut off.)
3. 16:9 Wide : You can view the full 16:9 picture on your
widescreen TV.
DISPLAY SETUP
TV Aspect
: 4:3 L-Box
Still Mode
: Auto
Screen Messages
: On
Black Level
: Off
TV System
: PAL
Video Output
: S-Video
TV ASPECT
4:3 Letter Box
4:3 Pan Scan
16:9 Wide
ENG-28
Setting Up the Display Options
Still Mode
These options will help prevent picture shake in still
mode and display small text clearer.
1. Auto : When selecting Auto, Field/Frame mode will be
automatically converted.
2. Field : Select this feature when the screen shakes in
the Auto mode.
3. Frame : Select this feature when you want to see
small letters more clearly in the Auto mode.
Screen Messages
Use to turn on-screen messages On or Off.
Black Level
Adjusts the brightness of the screen.(On/Off)
TV System
1. NTSC Disc : In case of using NTSC disc
• If your TV system only has PAL-Video input, you
must choose "PAL". When you choose "PAL",
Interlace output format is PAL 60 Hz output.
• If your TV system only has NTSC, input you must
choose "NTSC Output".
2. PAL Disc : In case of using PAL disc
• If your TV system only has NTSC-Video input, you
must choose "NTSC Output".
• If your TV system only has PAL input, you must
choose "PAL Output".
DISPLAY SETUP
TV Aspect
: 4:3 L-Box
Still Mode
: Auto
Screen Messages
: On
Black Level
: Off
TV System
: PAL
Video Output
: S-Video
Video Output
Select Video Output.
1. S-Video : Select when you want to use Video and
S-Video Out.
2. Component (I-SCAN) : Select when you want to use
Component Interlace
(625i/525i) Out.
3. Component (P-SCAN) : Select when you want to use
Component Progressive
(625p/525p) Out.
* If the Yes/No selection in the Display Setup sub Menu
is not made within 10 seconds, the screen returns to
the previous menu.
DISPLAY SETUP
TV Aspect
: 4:3 L-Box
Still Mode
: Auto
Screen Messages
: On
Black Level
: Off
TV System
: PAL
Video Output
: S-Video
Important Note
• Consult your TV User's Manual to find out if your
TV supports Progressive Scan. If Progressive
Scan is supported, follow the TV User's Manual's
instructions regarding Progressive Scan settings in
the TV's menu system.
• If the screen is blocked by setting the wrong Video
Output, see page 33.
ENG-29
Advertisement
Table of Contents
