Table of Contents
Advertisement
M408K(Asia)
3/9/01 7:24 PM
Page 8
Description-Front Panel
Front Panel Controls
STANDBY / ON
1
• When the unit is first plugged in, the indicator lights.
When STANDBY/ON is pressed on again, the light
goes out and the player is turned on.
MIC 1
2
• Connect microphone 1 for Karaoke functions.
MIC 2
3
• Connect microphone 2 for Karaoke functions.
4
VOLUME
• Use to adjust microphone volume level.
DIGITAL ECHO
5
• Use to adjust echo delay.
DISC TRAY
6
• Load the disc here.
7
DISPLAY
• Operation indicators are displayed here.
Front Panel Display
Angle indicator. You can select multiple angles
1
of a scene recorded by different cameras.
Disc type indicators
2
Reverse play / Pause / Forward play
3
Lights when 3D surround is turned on.
4
DVD : Title number
5
DVD : Chapter number.
6
Video/Audio CD : Track number
7
Repeat play mode
8
8
OPEN/CLOSE
8
• Press to open and close the disc tray.
PLAY/PAUSE
9
• Begin or pause disc play.
10
STOP
• Stops disc play.
11
SKIP
• Use to skip a scene or music.
JOG
12
• Use to access certain Shuttle features with
the Shuttle dial :When JOG is pressed,
indicator lights up.
13
SHUTTLE
• Use during DVD and CD play to fast for-
ward or reverse. In JOG mode(JOG button
pressed), used for frame advance/CD track
selection.
Linear PCM audio output
9
PAL indicator
10
Dolby Digital Disc
11
DTS (Digital Theater System) output
12
MPEG-2 Audio output
13
Displays various messages concerning
14
operations such as PLAY, STOP, LOAD, RANDOM, ...
no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc
information.
Description-Rear Panel
1
2
3
Rear Panel
DIGITAL AUDIO OUT JACKS
1
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
ANALOG AUDIO OUT JACKS
2
Connect to an amplifier with 5.1ch analog input jacks.
MIXED AUDIO OUT JACKS
3
• Connect to the Audio input jacks of your television, audio/video receiver, or VCR.
VIDEO OUT JACKS
4
• Use a video cable to connect to the Video input jack on your television.
S-VIDEO OUT JACK
5
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality pic-
ture. The S-Video must be selected in the VIDEO OUT SELECT.
COMPONENT VIDEO OUT JACKS
6
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y video.
Along with S-Video, Component Video provides the best picture quality. The Y, Pb, Pr must be selected in
the VIDEO OUT SELECT.
VIDEO OUT SELECT SWITCH
7
• Use the switch to set video out. If Scart jack is selected, S-Video may not work. If S-Video is selected,
Scart jack may not work.
4
5
6
7
•
9
Advertisement
Table of Contents
