Table of Contents
Advertisement
M408K(Asia)
3/9/01 7:25 PM
Page 40
Troubleshooting
Before requesting service (troubleshooting), please check the following.
Problem
• Check the batteries in the remote. May need replacing.
No operations can be
• Operate the remote control at a distance of no more than 20 feet.
performed with remote.
• Remove batteries and hold down one or more buttons for several min-
utes to drain the microprocessor inside the remote to reset it. Reinstall
batteries and try remote again.
• Ensure that the disc is installed with the label side facing up.
Disc does not play.
• Check the region number of the DVD.
5.1 channel sound is not
• 5.1 channel sound is reproduced only when the following conditions
being reproduced.
are met. :
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the "Dolby 5.1 ch" mark on
the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
The
icon appears on
• The features or action cannot be completed at this time because:
screen.
1. The DVD's software restricts it.
2. The DVD's software doesn't support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You've requested a title or chapter number or search time that is
out of range.
Disc Menu doesn't appear.
• Check if the disc has a Menu.
Play mode differs from the
• Some of the functions selected in the Setup Menu may not work prop-
Setup Menu selection.
erly if the disc is not encoded with the corresponding function.
The screen ratio cannot be
• The Screen Ratio is fixed on your DVDs.
changed.
• Make sure you have selected the correct Digital Output in the Audio
No audio.
Options Menu.
• Press power on from a cold start with no disc in the unit. Press the STOP
Forgot password
and PLAY buttons simultaneously on the front panel for three seconds. The
Select Menu Language display will appear. Select the desired language
button. Press the SETUP button on the remote control to select the Parental
Mode. The Parental Mode is now unlocked as indicated on the display.
Press the DOWN button to select Parental. Press ENTER and the Create
Password display will appear. You can now set your rating level and
change your password to a new number.
If you experience other
• Go to the contents and find the section of the instruction book that
problems.
contains the explanations regarding the current problem, and follow
the procedure once again.
• If the problem still cannot be solved, please contact your nearest
authorized service center.
40
Action
Page
P4
P7
P12
P15
P32~33
P32~37
P37
P36
P35
Power Requirements
AC 110~240 V, 50/60 Hz
Power Consumption
15 W
Weight
6.2 lbs
General
W 16.9 in x D 9.4 in x H 3.1 in
Dimensions
+41°F to +95°F
Operating Temperature Range
Operating Humidity Range
10 % to 75 %
Reading Speed : 11.45 ft/sec
DVD
(DIGITAL VERSATILE DISC)
Approx. Play Time
(Single Sided, Single Layer Disc) : 135 min.
CD : 5"
Reading Speed : 3.9 to 4.6 ft/sec.
Disc
Maximum Play Time : 74 min.
(COMPACT DISC)
CD : 3
"
Reading Speed : 3.9 to 4.6 ft/sec.
1/2
Maximum Play Time : 20 min.
(COMPACT DISC)
Reading Speed : 3.9 to 4.6 ft/sec.
VCD : 5"
Maximum Play Time : 74 min. (Video + Audio)
1 channel : 1.0 Vp-p (75 Ω load)
Composite Video
Component Video
Y : 1.0 Vp-p (75 Ω load)
Video
Pr : 0.70 Vp-p (75 Ω load)
Output
Pb : 0.70 Vp-p (75 Ω load)
S-VIDEO
Luminance Signal : 1.0 Vp-p (75 Ω load)
Chrominance Signal : 0.286 Vp-p (75 Ω load)
2 Channel
L(1/L), R(2/R)
48 kHz Sampling : 4 Hz to 22 kHz
*Frequency Response
Audio
96 kHz Sampling : 4 Hz to 44 kHz
Output
*S/N Ratio
110 dB
*Dynamic Range
100 dB
*Total Harmonic Distortion
0.004 %
*: Nominal specification
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
Specifications
.
41
Advertisement
Table of Contents
