Advertisement
Quick Links
Advertisement
Related Manuals for FALMEC Treviso 90
Summary of Contents for FALMEC Treviso 90
- Page 1 INSTALLATION MANUAL Treviso 90 falmecau.com...
- Page 2 CONGRATULATIONS Congratulations and thank you for choosing a Falmec rangehood. To avoid the risks that are always present when you use an electrical appliance it is important that the rangehood is installed correctly and that you read the safety in- structions carefully to avoid misuse and ha- zards.
- Page 3 PRODUCT DESCRIPTION & CARTON CONTENTS CARTON 1 - HOOD UNIT WALL HOOD - REMOTE MOTOR Models include: TREVISO + FP5TV90S2 Included in the carton: 1. Main hood housing including control module and lighting 2. Baffle filters 3. Fixing screws 4. Operating & installation guide Fig.
- Page 4 TREVISO + 90 FP5TV90S2...
- Page 5 HOOD INSTALLATION GUIDE - WALL HUNG - REMOTE MOTOR WALL HUNG CANOPY WARNING DIMENSIONS ARE ACCURATE AT THE TIME OF PRINTING, PR KITCHEN & WASHROOM SYSTEMS PTY LTD RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. FOR BUILDING PURPOSES THE UNIT SHOULD BE PROVIDED TO THE CABINET MAKER / BUILDER / KITCHEN DESIGNER FOR EXACT MEASUREMENTS.
- Page 6 HOOD INSTALLATION GUIDE - WALL HUNG - REMOTE MOTOR STEP 8: Before securing the flue in place, attach the 200 mm Flexi ducting to the flange of the rangehood. STEP 9: Place the flue on the hood and secure to the flue bracket. You may need to drill some new holes through the cover and bracket to secure the flue cover.
-
Page 7: Safety Instructions And Warnings
SAFETY INSTRUCTIONS If the equipment is sold or transferred to another person, make sure that the booklet is also supplied so that the new user can be made aware of the hood's operation and relative AND WARNINGS warnings. After the stainless steel hood has been installed, it will need to be cleaned to remove any residues remaining from the protection adhesive as well as any grease and oil stains which, if Installation operations are to be carried out by skilled and qualified in- not removed, can cause irreversible damage to the hood surface. -
Page 8: Operation
OPERATION USING THE RADIO CONTROL (OPTIONAL) OPERATING YOUR CONTROL PANEL WITH THE 6 BUTTON TOUCH CONTROL WARNINGS! Turning the extraction function ON or OFF: • In standby mode, press button 2 to turn on operating mode, then press buttons 3 through Place the hood away from sources of electromagnetic waves (e.g. -
Page 9: Maintenance
Do not use detergents containing abrasive, acidic or corrosive substances or abrasive cloths. Every FALMEC rangehood must be ducted to the external or in-roof motor unit by the use Regular maintenance guarantees proper operation and performance over time. of non-flammable ducting. The rangehood must not be ducted into a wall cavity or a ceiling Special attention is to be paid to the metal anti-grease filters: frequent cleaning of the space where a build-up of grease can occur and become a potential fire risk. - Page 10 REMOTE MOTOR SOLUTIONS Ø 403 / 445 EXTERNAL ROOF SOLUTION 765, 1140 & 2010m 1. Fan power supply connects to internal hood unit. 2. Tile or metal roof flashing (optional accessory). 3. Rigid duct mount (optional accessory). 4. 200mm flexi ducting (attached to internal hood unit)*. * Advise to include gentle bend in duct run as well ensuring ducting is pulled tight and excess removed.
- Page 11 PART 2: MOTOR INSTALLATION GUIDE IN ROOF SOLUTION Positioning your In-Roof Unit: It is recommended that the In-Roof motor unit be mounted in a roof space or wall cavity. Please ensure that the In-Roof motor unit is positioned in an environment that is free of Mounting Bracket Outlet other gases to enable an efficient expulsion of the cooking by-products and to ensure that...
- Page 12 EXTERNAL ROOF SOLUTION - TILE ROOF INSTALLATION Inspection: Ensure the unit has arrived in good condition and that the impeller will spin freely. This product is designed to be installed on a roof up to 45° pitch. 1. Installation of this product should be carried out by appropriately qualified persons. 2.
- Page 13 EW-765 / EW-1140 SPECIFICATIONS 4 holes All measurements in mm EW-2010 SPECIFICATIONS 4 holes All measurements in mm...
- Page 14 You are also entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. The benefits under FALMEC’s warranty are in addition to other rights you have at law in relation to the appliances or services to which the warranty relates.
- Page 15 NOTE - NOTES...
- Page 16 PR Kitchen & Washroom Systems NZ P.O. Box 53171, Auckland Airport Auckland — 2150 New Zealand +09 964 0400 info@prks.com.nz Falmec S.p.A via dell’Artigianato, 42 z.i. 31029 Vittorio Veneto Treviso — Italy falmec.com Codice / Code Matricola / Serial Number...
Need help?
Do you have a question about the Treviso 90 and is the answer not in the manual?
Questions and answers