Choosing A Connection - Samsung DVD-E218 User Manual

Choosing a Connection

The following show examples of connections commonly used to connect the DVD player
with a TV and other components.
Before Connecting the DVD Player
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables.
• Refer to the owner's manual of the additional components you are connecting for
more information on those particular components.
Connection to an Audio System
Method 1
AUDIO
SYSTEM
2ch Amplifier
Audio Input Jacks
DVD
PLAYER
e.g) DVD-E218
ANALOG AUDIO OUT
Analog Audio Out
12
Method 2
Dolby Digital Decoder
Digital Audio Input Jacks
OR
COAXIAL
OPTICAL S-VIDEO OUT
Digital Audio Out
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Method 1
Good
Basic Audio
picture
TV
AV Cable
DVD
PLAYER
e.g) DVD-E218
ANALOG AUDIO OUT
Audio Output Video Output
Jacks Jack
DVD Player + TV with Video Input Jack
Method 1
DVD Player + TV with S-Video Input Jack
Method 2
(If S-Video is selected in the VIDEO OUT SELECT.)
DVD Player + TV with Component Video Jacks
Method 3
(If COMPONENT is selected in the VIDEO OUT SELECT.)
NOTE
• If COMPONENT is selected, S-Video will not work.
• If S-Video is selected, COMPONENT will not work.
Choosing a Connection
Method 2 Method 3
Better Best
picture picture
S-Video Video
Cable Cables
OR
OR
COMPONENT
COAXIAL
VIDEO OUT
SELECT
VIDEO OUT S-VIDEO OUT S-VIDEO COMPONENT VIDEO OUT
S-Video Jack
Component Video
Jacks
COMPONENT
VIDEO OUT
SELECT
S-VIDEO
13