Table of Contents
Advertisement
DVD-C5050
12/4/02 3:16 PM
Rear Panel
DIGITAL AUDIO OUT JACKS
1.
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
ANALOG AUDIO OUT JACKS
2.
• Connect to the Audio input jacks of your television, audio/video receiver, or VCR.
3.
VIDEO OUT JACKS
• Use a video cable to connect to the Video input jack on your television.
4.
COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y
video. Along with S-Video, Component Video provides the best picture quality. The Y, Pb, Pr must be
selected in the VIDEO OUT SELECT.
S-VIDEO OUT JACK
5.
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality
picture. The S-Video must be selected in the VIDEO OUT SELECT.
6.
VIDEO OUT SELECT SWITCH
• Use the switch to set video out.
• If Y, Pb or Pr is selected, S-Video will not work.
• If S-Video is selected, Y, Pb or Pr will not work.
NOTE
• Select the VIDEO OUT SELECT switch in the STOP or Power off mode.
Page 9
Description-Rear Panel
S-VIDEO
VIDEO OUT
SELECT
Y,Pb,Pr
9
Advertisement
Table of Contents
