Setting Up The Audio Options - Samsung DVD-C5050N User Manual

Setting Up the Language Features
Using the Audio Language
1
With the unit in Stop mode, press the MENU button.
2
Select Setup using UP/DOWN buttons, then RIGHT
or ENTER button.
3
Select Language Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
4
Select Audio using UP/DOWN buttons, then press
the RIGHT or ENTER button.
5
Press the UP/DOWN buttons to select 'English'.
- Select "Original" if you want the default soundtrack language to
be the original language the disc is recorded in.
- Select "Others" if the language you want is not listed.
6
Press the ENTER button.
- English is selected and the screen returns to SETUP menu.
Using the Subtitle Language
1
With the unit in Stop mode, press the MENU button.
2 Select Setup using UP/DOWN buttons, then RIGHT
or ENTER button.
Select Language Setup using UP/DOWN buttons,
3
then press the RIGHT or ENTER button.
4
Select Subtitle using UP/DOWN buttons, then press
the RIGHT or ENTER button.
5
Use the UP/DOWN buttons to select 'English'.
- Select "Automatic" if you want the subtitle language to be the
same as the language selected as the audio preference.
- Select "Others" if the language you want is not listed.
Some discs may not contain the language you select as
your initial language; in that case the disc will use its
original language setting.
6
Press the ENTER button.
- English is selected and the screen returns to SETUP menu.
38
AUDIO LANGUAGE AUDIO LANGUAGE
Audio
Original
Others
SUBTITLE LANGUAGE SUBTITLE LANGUAGE
Automatic
Subtitle
Others
NOTE
• If the selected language is not
recorded on the disc, the original
pre-recorded language is selected.
• How to make the SETUP menu
disappear or return to menu screen
during set up; Press RETURN or
LEFT button.

Setting Up the Audio Options

1
With the unit in Stop mode, press the MENU button.
2
Select Setup using UP/DOWN buttons, then RIGHT
or ENTER button.
3
Select Audio Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.
4
Use the UP/DOWN buttons to select the desired
item. Then press the RIGHT or ENTER button.
Dolby Digital Output
1. PCM : Converts to PCM(2CH) 48kHz audio Select PCM
when using the Analog Audio Outputs.
2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
Be sure to select the correct
NOTE
Digital Output or no audio will be heard.
MPEG-2 Digital Out
1. PCM :
Converts to PCM(2CH) audio. Select PCM when using the Analog Audio Outputs.
2. Bitstream :
Converts to MPEG-2 Digital Bitstream (5.1CH or 7.1CH).
Select Bitstream when using the Digital Audio Output.
DTS
1. Off : Doesn't output digital signal.
2. On : Outputs DTS Bitstream via digital output only. Select DTS when connecting to a DTS Decoder.
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
PCM Down Sampling
1. On : Select this when the amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
2. Off : Select this when the amplifier connected to the player is 96KHz compatible.
In this case, all signals will be output without any changes.
NOTE
• How to make the SETUP menu disappear or return to menu screen during set up;
Press RETURN or LEFT button.
• Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
• "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
AUDIO SETUP AUDIO SETUP
Dolby Digital Output : PCM
MPEG-2 Digital Out : Off
DTS : Off
Dynamic Compression : On
PCM Down Sampling : On
39