Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for CAGO All-Weather-Top
Summary of Contents for CAGO All-Weather-Top
- Page 1 All-Weather-Top Assembly instructions...
-
Page 2: Table Of Contents
Contents Safety notices ........................ 3 General information ..................... 4 Intended use ........................5 Scope of delivery ......................6 Pre-assembly ....................... 12 Installing the centre section ..................15 Installing the side panels .................... 16 Installing the rear section ..................17 Installing the sun screen .................... 18 General notes on care .................... -
Page 3: Safety Notices
Safety notices This user manual contains various types of notice. The notices are designed as follows: Danger Notice Potential hazards for your health Provides information about how and the health of your co-riders and to handle the product or refers to other road users if you fail to observe a passage in the user manual that the respective instructions or do not... -
Page 4: General Information
General information Fig. 1 The All-Weather-Top is the uncomplicated sun top and rain cover for your FS200 Life. It protects your kids from the weather as they sit in the transport box. It can be adapted in numerous ways, all described in these assembly instructions. -
Page 5: Intended Use
FS200 Life. be engaged in the knobs in the top section of the ortho safety collar. If the All-Weather-Top is open or only partially closed, the view to- ward the front can be significantly impacted. -
Page 6: Scope Of Delivery
Scope of delivery Fig. 5 The All-Weather-Top consists of: Sun screen M5 countersunk head screw (2 pieces) Left side panel M4 sleeved screw (2 pieces) and Centre section with integrated M4 pan head screw (2 pieces) aluminium frame Right side panel... - Page 7 (Fig. 7). Fig. 8 Fig. 9 The All-Weather-Top is to be closed before every ride. To do this, grab the All-Weather-Top on both Fidlock® closures and pull it down (Fig. 8). Then press the closures onto the Fidlock® counterpieces on the sides of the Ortho-Safety-Collar until they engage noticeably and with an audible click (Fig. 9).
- Page 8 Typical applications Depending on the weather conditions, the All-Weather-Top can be used either as a complete set, with the side panels removed and/or with the rear section removed. The sun screen can be inserted as needed. Fig. 10: All-Weather-Top complete Fig. 11: All-Weather-Top without rear section...
- Page 9 Fig. 12: All-Weather-Top without rear section, without side panels Fig. 13: All-Weather-Top without side panels, with sun screen...
- Page 10 Fig. 16: Viewing panel closed Fig. 17: Viewing panel open The rear section of the All-Weather-Top has a viewing panel with a textile sight screen that can be used either open or closed. The sight screen is either closed or rolled up tightly and fastened with Velcro straps (Figs. 16 and 17).
- Page 11 Fig. 18 Fig. 19 The side panels of the All-Weather-Top are kept in place on the left and ride sides by integrated magnets in the lower area of the Ortho-Safety-Collar (Fig. 18). To make it easier, for instance, to put luggage in the transport box, both side panels can be folded upward and fastened in that position by Velcro straps and magnets (Fig. 19).
-
Page 12: Pre-Assembly
5 mm Allen key (Fig. 22). Place the oblong holes of the adapter plate of the All-Weather-Top in front of the fastening clamp and align it with the threads in the frame. Carefully screw in the M6 screws, making sure they go in straight (Fig. 23). - Page 13 Fig. 27 Fig. 28 Fig. 29 Fig. 30 If the All-Weather-Top is supplied separately from the transport box, the centre section needs to be assembled first before use. We recommend you perform this task on a soft and smooth support surface to prevent scratching the windows.
- Page 14 Fig. 31 Fig. 32 Now stretch the centre section of the All-Weather-Top over the aluminium frame using the lashing straps in the front (Figs. 31 and 32). Fig. 33 Fig. 34 Fig. 35 Fig. 36 Open the Velcro strap of the textile belt strap, stretch it over the aluminium frame and close it again.
-
Page 15: Installing The Centre Section
Installing the centre section Fig. 38 Fig. 39 To fasten the All-Weather-Top, push the front metal tongue into the adapter plate in the transport box (Fig. 38). Following this, screw in the tommy screw and tighten it hand-tight (Fig. 39). The textile belt strap can be fastened as needed by a Velcro strap, allowing to control the opening angle of the All-Weather-Top. -
Page 16: Installing The Side Panels
Installing the side panels Fig. 42 Fig. 43 Pull the zippers of the side panels closed toward the front (Fig. 42). Close the snap fasteners in the front area of the side panels. While doing so, turn the inside of the side panels outward (Fig. 43) and fasten it to the inside of the centre section . -
Page 17: Installing The Rear Section
Ortho-Safety-Collar. Before every ride, check that the rear section is installed correctly on the Ortho-Safety-Collar. When the All-Weather-Top is closed, the handlebar must be fully movable without obstructions. Otherwise there is a risk of crashes and acci- dents (Fig. 46)! -
Page 18: Installing The Sun Screen
Using several Velcro straps, the sun screen can be fastened to the inside of the All-Weather-Top in various positions (Fig. 47). It is thus possible to shade smaller or larger areas inside the transport box as needed. The sun screen can optionally also be velcroed to the Fidlock® strap,... -
Page 19: General Notes On Care
Never use aggressive cleaning Do not use abrasive sponges or agents, acids or solvents to clean the media, as these may scratch the All-Weather-Top. Such substances window areas. can corrode surfaces or damage the belts. This may affect the stability of the components. - Page 20 Published by: Ca Go Bike GmbH Am Autobahnkreuz 7 56072 Koblenz Germany +49 261 914090-600 info@cagobike.com www.cagobike.com Managing directors: Franc Arnold Company register Court of record: District Court Koblenz / register no.: HRB 26998 / VAT Id no. DE326206636 Responsible for distribution and marketing of the user manual: Ingo Kahnt Ca Go Bike GmbH reserves the right to change product specifications without prior notice.