Samsung SGH-S300 User Manual page 5

Setting Up the WAP Browser
2. Select a proxy server and enter the parameters
required. Contact your service provider for
details.
Parameter Description
Profile Name that you wish to assign to
Name the HTTP proxy server.
Homepage Address of your startup
URL homepage. When the default
homepage displays, you can
delete it using the
enter your own choice.
Security Data transmission mode. Choose
Secure to protect your data
against unauthorised access;
otherwise, choose Non-Secure .
IP Address WAP gateway address required to
connect to the Internet.
Bearer Bearer to be used for each type of
network address accessed: GPRS
or Data .
The remaining options depend on the Bearer
setting, as indicated below.
When the bearer is set to Data
Parameter Description
Login PPP server login ID.
Name
Password PPP server password.
Dial-up PPP server phone number.
Number
Data Call Data call type: Analogue or
Type ISDN .
8
key and
Setting Up the WAP Browser
When the bearer is set to GPRS
Parameter Description
User Name User ID required to connect to the
GPRS network.
Password Password required to connect to
the GPRS network.
APN Access point name used for the
address of the GPRS network
gateway.
Note : The WAP Browser settings may vary,
depending on the service provider. Contact
your service provider for further information.
3. After selecting each of these settings, a dialog
box displays; you can either enter the
information required or choose between given
options. When you are satisfied with your input,
press the OK soft key.
4. When you have finished configuring the WAP
Browser, press the
key.
key or the right soft
9