Hubble Pure - Air Purifier Quick Start Guide

Setting up your Air Purifier

1. Install HEPA filter for your Air Purifier.

• Take the HEPA filter out from polybag.
• Follow the UNLOCK mark to loose the bottom cover.
  
• Put back the HEPA filter into the compartment.
• Replace the bottom cover then rotate to lock.
• Place the unit back to upright position.
  

2. Connecting power supply for the Air Purifier
   

• Connect the micro-USB plug of the power adaptor to the air purifier and the other end to the electrical outlet.
• Use only the enclosed power adaptor (5VDC 2A).
• Press once to power on the air purifier.

Overview of Operation

Functions	Descriptions
On/Off key	Toggle to power on (Blue key backlit) and power off (Red key backlit).
Fan Speed key	Tap to select fan speeds: Low (low Blue key backlit); Middle (moderate Blue key backlit); High (bright blue key backlit).
Night Light key	Blue key backlit: 7 Night Light colors plays in cyclic, tap once the button to confi rm the color selection, long press 3s to switch off the Night Light. First power up: Auto cyclic mode (or color selection mode). Tap 1st time the button: Stop to select the desired night light at auto cyclic. Tap 2nd time the button: Switch to steady white color. Tap 3rd time the button: Repeat the auto cyclic mode (or color selection mode) and subsequent key actions.
Sleep On key	Tap to enter Sleep On mode: Backlit key LED turns to dim blue, the Fan speed is locked at low speed and Night Light will be off. Tap twice to switch off the Sleep On mode.
Bluetooth speaker	Bluetooth speaker enters discovery mode at 1st power up, ready to pair with Bluetooth-enabled mobile device (device name is ST700). All the audio streaming operation is controlled on your mobile device app.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Hubble Pure - Air Purifier Quick Start Guide