Table of Contents
Advertisement
CB2 Manual
3.3 Using a USB Device
Your vessel information can be transferred from your Android phone or computer/laptop to
the CB2 using a USB stick and the provided USB On-the-Go cable.
Ensure the CB2 is powered off before inserting the USB stick.
!
Once inserted, power on the unit. The CB2 will upload the information from the USB stick
automatically. This may take a few moments. Once the LED stops flashing and a steady
Green or Green/Amber flashing* light can be seen, the information is stored.
Press and hold the LED button for 10 seconds, the LED will start to flash Red/Amber and
on release will alternate Green and Amber to allow the USB stick to be safely removed
without corruption. The LED will revert to normal operation once the USB stick is removed.
You can use the Android App (see above) or the web-based software to upload vessel
information onto the USB Stick. The web-based software is available at
www.acrartex.com/survival-products/aislink-cb2-web-app .
* Dependant on whether LRM is turned on.
912S-02858-01.12
15
Advertisement
Table of Contents
