Using Wifi (An Internet Connection Is Required) - ACR Electronics AISLink CB2 User Manual

3.2 Using WiFi (An Internet connection is required)
Search for ACR AIS Config.
From the Google Play Store
Install the ACR App on your mobile device.
Set-up a WiFi connection with your mobile device (initial connection only)
• Turn off the power to the CB2.
• Press and hold the LED button and turn on the power. Keep the button held
for 6 seconds until the LED turns Red following Amber flashes. Release the
button and the LED will remain, Amber blinking off every 2 seconds to indi-
cate the CB2 is in Wi-Fi connection mode.
Open the App on your mobile device and available devices will be discovered (this may
take a few moments). Once the search has completed, select the CB2 to pair with your
mobile device (for iOS only, this is automatic using Android).
Follow the instructions in the App to upload the vessel information to your paired CB2.
14
CB2 Manual
or
912S-02858-01.12
the Apple App Store