Table of Contents
Advertisement
2. Plug the charger into a standard AC wall outlet.
3. The LED on the charger shows the status of the
battery being charged.
• Red: the battery is charging.
• Green: the battery is fully charged.
• Orange: the charger is not plugged in
correctly.
4. When charging is finished, unplug the charger
from the AC wall outlet and from the phone by
pressing the PUSH button on the connector
and pulling the connector out.
Conserving battery power
You can conserve power by the following
methods:
• Switch the phone to Sleep mode when you
don't use it. Slide the Power key down for
approximately 1.5 seconds to activate Sleep
mode.
• Turn off the backlight. Slide the Power key
down and hold.
• Adjust the power settings and backlight
settings. For details, see page 16 and page
17.
• Close multiple applications running on your
phone. Multitasking will consume your battery
faster and can cause your phone's system to
react slowly.
: Closing multimedia applications, such as
Note
camera or Media player, allows your phone to
recover some of its battery.
Getting started
15
Advertisement
Table of Contents
