Brother PJ-600 Series Command Reference Manual page 40

Name
Syntax
Description
Name
Syntax
Description
Name
Syntax
Description
Name
Syntax
Description
© 2015 Brother Industries, Ltd. All Rights Reserved.
Brother PJ-600/700/800 Series Command Reference 37
Specify Default font
ESC + k + {n1}
1B H + 6B H + {n1}
Select the font to be used.
Definition of {n1}
00 H(0):Serif
01 H(1):Sans Serif
Specify reduced characters
ESC + 0x0F
1B H + 0F H
The width of proportional characters is halved (10 cpi→16.67 cpi and 12 cpi → 20
cpi).
After this command is specified, the page length in lines and bottom margin must
be specified again.
In addition, the final character size when this command is executed and the
"specify double-width characters" is set becomes the size of the double-width
characters after they are reduced.
Cancel reduced characters.
ESC + 0x12
1B H + 12 H
Cancels reduced characters
After this command is specified, the page length in lines and bottom margin must
be specified again.
Apply bold style
ESC + E
1B H + 45 H
Applies the bold style to alphanumeric characters.