Table of Contents
Advertisement
Menu functions
Your phone is set by default for connecting
to the network by default. If you change the
settings without first checking with your
service provider, the web browser and MMS
features may not work properly.
Creating a profile
1. Press <New>. If a profile has already
been saved, press <Options> and
select Add new connection.
2. Specify profile parameters:
•
Profile name: enter a profile name.
•
Homepage URL: enter the URL
address of the page to be used as
your homepage.
•
Proxy: activate or deactivate the
proxy server.
•
IP address: enter the IP address of
the proxy server.
•
Port: enter the port number of the
proxy server.
•
Linger time: set a time period after
which the network is disconnected if
there has been no new data traffic in
that time.
90
•
DNS: activate or deactivate the DNS
(Domain Name Server) addresses.
•
DNS 1 and DNS 2: enter the primary
and secondary DNS addresses.
•
Bearer: select the network bearer
type.
•
Advanced settings: change the
advanced options. Depending on the
bearer setting, available options vary.
When the bearer is set to GPRS:
APN: enter the access point name.
Login ID: enter the login ID.
Password: enter the login
password.
When the bearer is set to GSM:
Dial number: enter the PPP phone
number.
Login ID: enter the login ID.
Password: enter the login
password.
Data call type: select a call type for
data transmission.
3. Press <Save> to save the profile.
Advertisement
Table of Contents
