Toro eHoverPro 450 Operator's Manual page 10

1. Lower handlebar
2. Knob
3. Washer (6 mm)
2. Assemble the upper handlebar to the lower
handlebar wit the 2 U-bolts, 2 washer (6 mm),
and 2 knobs.
Assembling the Cable to the
Operator-Presence Bail
1. Squeeze the leg of the operator-presence bail
until you can remove it from the upper handlebar,
and remove the bail from the machine
Figure 8
4. Upper handlebar
5. U-bolt
(Figure
g364684
2. Insert the cable fitting through the hole in the
bracket of the operator-presence bail as shown
in Figure
9).
1. Bracket
(operator-presence bail)
10
Figure 9
10.
Figure 10
2. Cable fitting
g367353
g367914