GENERAL POWER TOOL • Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may Read all safety warnings, instruc- WARNING result in personal injury.
If the tool is not in • Maintain labels and nameplates. These carry contact with the workpiece, the fastener may be important information. If unreadable or missing, contact a MILWAUKEE service facility for a ® • Disconnect the tool from the power source when replacement.
To reduce the risk of injury, always wear proper eye protection marked to comply SPECIFICATIONS with AS/NZS 1337.1. Cat. No..........M12 BCST To install fasteners: Volts............12V DC Remove battery pack. Battery Type ..........M12™ Always point the tool away from WARNING Charger Type..........M12™...
Complete the following checklist IN ORDER. Reload Indicator If the tool does not work as it should, contact a To indicate that the magazine is empty of fasteners , MILWAUKEE service facility immediately. ® the workpiece contact will not compress, preventing Always point tool away from yourself and others.
Return the tool, battery pack, and charger to a MILWAUKEE service facility for ® repair. After six months to one year, depending on...
Page 8
Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...
Need help?
Do you have a question about the M12 BCST and is the answer not in the manual?
Questions and answers