Table of Contents
Advertisement
Mosaic shot: take several stills and save them in
one frame. You can select the layout.
•
Effects: change the colour tone or apply a special
effect.
•
Frames: apply a decorative frame.
•
Flash: determine the use of the flash.
•
Timer: set a time delay before the camera takes a
photo.
•
Go to photos: go to the Photos folder.
•
Settings: change the default settings for taking a
photo.
Size: select an image size.
Quality: select an image quality setting.
View finder: select a preview mode, either Full
screen mode or Standard ratio mode with actual
ratio.
ISO: change the ISO setting, which controls the
sensitivity of your camera. For low light situations,
lower the ISO number to increase image quality.
The higher the ISO number, the faster the camera
shutter functions and the more sensitive the
camera is to light. Higher ISO settings may bring
some distortion to an image.
Spot focus: adjust the exposure based on a
specific area of the image. Select On to display the
spot focus frame in the middle of the image, and
change the exposure according to the brightness of
the image fragment in the frame.
Shutter sound: select the sound that you hear
when you press the shutter release, [Camera] or
[
].
Zoom sound: turn the sound effect for zooming
on or off.
Brightness sound: turn the sound effect for
brightness adjustment on or off.
Default name: change the default prefix of the
photo name.
•
Camera short cuts: view the functions of the
keys you can use in Capture mode.
79
Advertisement
Table of Contents
