Table of Contents
Advertisement
1. Press [
] to answer the call. The first call is
automatically put on hold.
2. Press <Swap> to switch between the calls.
3. Press <Options> and select End held call to end
the call on hold.
4. To end the current call, press [
Using the Speakerphone feature
Use the speakerphone feature to talk and listen with
the phone a short distance away.
Press [
] to activate the Speakerphone feature.
Press the key again to switch back to the earpiece.
Using In-call options
Press <Options> to access the following options
during a call:
•
Voice clarity on/Voice clarity off: remove
extraneous noise and increase all call quality so
that the person with whom you are speaking can
hear you clearly even if you are in a noise place.
•
•
].
•
•
•
•
Mute/Unmute: switch off the phone's microphone
so that the other person on the phone cannot hear
you, or switch it back on.
Mute keys/Send keys: switch the key tones on
or off.
To communicate with answering machines or
computerised telephone systems, Send keys
must be selected.
Phonebook: access the contact list.
Transfer: You can transfer the currently active call
to a caller on hold, if your network supports it.
With this option, the two callers can talk to each
other, but you are disconnected from the call.
Send DTMF: send the DTMF (Dual tone multi-
frequency) tones as a group. The DTMF tones are
the tones used in phones for tone dialling,
sounding when you press the number keys. This
option is helpful for entering a password or an
account number when you call an automated
system, like a banking service.
Message: read an incoming message and send a
new message.
p. 57
37
Advertisement
Table of Contents
