Download Print this page

babybay Original Assembly Instructions Manual

Handling & care bedside sleepers
Hide thumbs Also See for Original:

Advertisement

Quick Links

ASSEMBLY INSTRUCTIONS
HANDLING & CARE
Original / Maxi / Maxi Tall
Bedside Sleepers
READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF THIS PRODUCT.
KEEP INSTRUCTIONS FOR FUTURE USE
06/2023

Advertisement

loading

Summary of Contents for babybay Original

  • Page 1 ASSEMBLY INSTRUCTIONS HANDLING & CARE Original / Maxi / Maxi Tall Bedside Sleepers READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE OF THIS PRODUCT. KEEP INSTRUCTIONS FOR FUTURE USE 06/2023...
  • Page 2 DO NOT use bedside sleeper if any parts are missing, damaged, or broken. Contact babybay for replacement parts and instructional literature if needed. DO NOT substitute parts. Do not place the babybay near a space heater, open fire or other source of WARNING: strong heat.
  • Page 3: Fall Hazard

    If a sheet is used with the pad, use only the one provided by babybay. To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by your physician.
  • Page 4 E2. Resistance Hang Dry Only Anchors Plate Do Not Bleach Do Not Iron Dry Clean OK Canopies *Original/Maxi Only **Maxi Tall Only Hand Wash Only at 104⁰F (40⁰C) A. Left Rail B. Middle Rail C. Right Rail D. Sleeping Platform Platform...
  • Page 5 BUILDING YOUR BABYBAY 3. Insert the 4 cross dowels (Part #1116) into parts A and B so the hole in the side of the cross dowel and the hole in the end of the rail are aligned as 1. Locate the 3 rail pieces (Parts A, B, C). Position the rails upside down so that shown.
  • Page 6 #1211 8. Place the frame flat on the ground as shown. Position the sleeping platform (Part D) so that the 4 platform blocks (Part Y) face the bottom of the babybay (end with large holes). 6. Place the sleeping platform (Part D) so the large holes on the perimeter face up.
  • Page 7 NOTE: The sleeping platform height must be at least 10 inches below the top rail. Next stand the babybay right side up and secure the other 2 frame clamps on the back of the babybay using the same method. Screws should be finger tight.
  • Page 8 2. Move the babybay next to the bed. Make sure the top of the safety barrier 1. Move the babybay next to the bed. Make sure the top of the safety barrier is below the top of the parent’s mattress and adjust the sleeping platform is below the top of the parent’s mattress and adjust the sleeping platform...
  • Page 9 If you have any questions please call or email babybay USA info@babybay.us (844) MY BABYBAY Hours: 9:00 A.M. to 5:00 P.M. Pacific Standard Time www.babybay.us...

This manual is also suitable for:

MaxiMaxi tall