Page 2
The top edge of the mattress pad must be level with or below the top of the adult bed mattress when used as a bed. The level of the babybay® bed mattress pad must be a minimum of 10 inches below the top edge of the frame.
Page 3
If the child can set up, knee or pull up itself, babybay® is not to be used for sleeping for this child any longer. All fitting parts have to always be fastened appropriately. The screws should not be loose-fitted, because the child can pen itself, clothes (e.g.
Page 4
• A bedside sleeper is designed to provide a sleeping area for an infant until he or she begins to push up on hands and knees or approximately 5 months of age. Move your child to another sleeping product when your child reaches this stage.
Page 5
List of Parts as illustrated Part # 1117 Part # 1116 Part # 1122 Part # 1211 Part # 1200 Updated 05.02.2016...
Page 6
180° Part # 1117 Part # 1117 Part # 1117 Part # 1117 Part # 1116 Part # 1116 Part # 1116 Part # 1116 Updated 05.02.2016...
Page 7
Part # Part # 1122 1122 Part # Part # 1122 1122 90° Updated 05.02.2016...
Page 8
Part # 1211 Part # 1211 Part # 1211 Part # 1211 Part # Part # 1200 1200 inches Part # 1211 Part # 1211 Part # 1200 Updated 05.02.2016...
Page 10
Tighten the attachment straps at the strap loops protruding out of the resistance plate on the other side of the parent bed so that the babybay® is pulled tight against the parent bed. Check tightness of the attachment straps each time you place the baby into babybay® so that there can never be a gap between the parent bed and babybay®.