Volvo V60 Cross Country 2019 Owner's Manual page 144

DISPLAYS AND VOICE CONTROL
||
no response then voice control will be cancel-
led automatically.
To speed up communication and skip the
prompts from the system, press the steering
wheel button for voice control
cels the system voice and you can say the next
command.
Example of voice recognition control
Press .
1.
2. Say "
Call [Forename] [Surname]
[number category] ", e.g. "
Smith Mobile ".
> The system dials the selected contact
from the phonebook. If the contact has
several phone numbers (e.g. home,
mobile, work), the right category must
be referred to.
Commands/phrases
The following commands can generally be
used, regardless of the situation:
" Repeat " - repeats the last voice instruc-
•
tion in the ongoing dialogue.
" Cancel " - discontinue the dialogue.
•
Help
" " - starts a help dialogue. The sys-
•
tem replies with the commands available
in the current situation, a prompt or an
example.
20
Note that this only stops the dialogue when the system is not speaking. To do that, give a long press on
142
Commands for specific functions such as
phone and radio are described in specific sec-
tions.
Digits
The number commands are stated differently
. This can-
depending on the function to be controlled:
Phone numbers and postcodes must be
•
spoken individually, number by number,
e.g. "zero, three, one, two, two, four, four,
three" (03122443).
House numbers can be spoken individu-
•
Call Robin
ally or in groups, e.g. "two, two" or
"twenty-two" (22). For English and Dutch,
several groups can be said in sequence,
e.g. "twenty-two, twenty-two" (22 22).
For English, double or triple can be used,
e.g. "double zero" (00). Numbers can be
given within the range 0-2300.
Frequencies can be spoken as "ninety
•
eight point eight" (98.8), "a hundred and
four point two" or "hundred four point
two" (104.2).
Speed and repetition mode
It is possible to adjust the speed if the system
20
is speaking too quickly.
Repetition mode can be enabled so that the
system repeats what you have said.
To change the speed or activate/deactivate
repetition mode:
1. Press Settings
2. Press System
select settings.
Repeat Voice Command
•
Speech Rate
•
Related information
Voice recognition (p. 140)
•
Controlling a telephone with voice recog-
•
nition (p. 143)
Voice control of radio and media (p. 143)
•
Controlling climate control with voice rec-
•
ognition (p. 200)
Settings for voice recognition (p. 144)
•
until two beep tones are heard.
in the top view.
Voice Control and