ETC Response Opto-Splitter Setup Manual

ETC Setup Guide
Response Opto-Splitter

Rack-Mount power

120-230VAC, 50-60Hz, 35W Max
(See reverse side for more info
on revisible power connector)

LED indicator lights

Top (blue) Power
Bottom (green)
DMX = OK
DMX = None/Error
Firmware update
2x
in progress
Corporate Headquarters Middleton, WI, USA +1 608 831 4116 London, UK +44 (0)20 8896 1000
Holzkirchen, DE +49 (80 24) 47 00-0 Rome, IT +39 (06) 32 111 683 Hong Kong +852 2799 1220 Paris, FR +33 1 4243 3535
Web etcconnect.com
© 2023 Electronic Theatre Controls, Inc. Trademark and patent info:
Product information and speci cations subject to change. ETC intends this document to be provided in its entirety.
4267M2290 Rev C Released 2023-01

DIN rail power

12-48VDC, 8W Max
(See reverse side for more info)
Support support.etcconnect.com Contact etcconnect.com/contactETC
etcconnect.com/ip

DMX termination

ON (up)
OFF (down)
Mount Version

terminal connectors

DMX termination
OFF ON
Terminal connectors
Termination instructions provided with the
included termination kits

Mounting Brackets

DIN rail
Attach the rack ears with the
Available with

Connector Pinouts

XLR
RJ45
Push Push
5
1
1 8
4
2
3
1 (COM) 1 (DATA+)
2 (DATA-) 2 (DATA-)
3 (DATA+) 7 (COM)
three screws (provided)
Rack-Mount Version
Available with terminal,
RJ45, or XLR connectors
Terminal
1 3
1 (COM)
2 (DATA-)
3 (DATA+)