Operations; Control Panel - Samsung WA12J675 Series User Manual

Operations

Control panel

01
03 04
01 Display
02 Delay End
03 Water Level
04 Wash
05 Rinse
06 Power Spin
07 Activ Dual
Wash
08 Temperature
09 Power
26 English
WA6700JS(PREMIUM)-03515J-01_EN_K_150127.indd 26
08
02
05 06 07
Displays the remaining time of a cycle, or the information code when
a problem occurs.
Press this button to finish the wash at a specified time.
To cancel the Delay End settings, simply turn off the washing
machine.
You can set the Delay End time up to 19 hours.
The water level is adjusted according to the cycle. However, you can
change the level manually.
Press to start washing, or adjust the wash time between 6 and 30
minutes.
Press to run the rinse cycle, or change the rinse count up to 5.
Press to run the spin cycle, or change the spinning time in this
sequence: 1-9 min (increase by 1 minute) > 15 min > 30 min.
This button provides two options, and is available only when the
washing machine is stopped or in Standby state.
Water Save (default): Select to reuse water in the tub that remains
•
after using Water Jet. The water will be used for the main cycle.
• Drain: Select to drain water that remains after using Water Jet.
When draining is complete, the washing machine switches to
Water Save mode automatically. Then, you can choose a cycle.
After draining is complete, the washing machine switches to Water
Save automatically. Only then, can you choose a cycle.
Press to select a temperature level from 3 choices: Cold > Cold/Hot >
Hot.
Press once to turn the machine on, or twice to turn it off.
09 11
10
2015-01-27 11:58:03