Page 1
WASHING MACHINE User’s Manual FEATURES SAFETY INSTRUCTIONS DESCRIPTION OF PARTS CONTROL PANEL WASHING PROCEDURE Fuzzy course Heavy duty course Delicate course Delay start course MANUAL FUNCTIONS INSTALLATION & MAINTENANCE Levelling Connecting the water supply hose Assembling the part protection panel In case of pump-drained washer Connecting the drain hose How to add the fabric softener...
FEATURES FUZZY CONTROL • Fuzzy control operates with best washing course by sensing the washload like artificial intelligence. PULSATOR • The Pulsator helps water and detergent to go through fabrics efficiently while providing both the powerful water action to clean larger and heavier clothes and the gentle water action to clean all delicates with less wear and tear on clothes.
SAFETY INSTRUCTIONS Please note that the following precautions for safety intend to prevent unpredictable danger and damage by helping the proper use in safety. When using hot water in washing, please make sure that the water should not exceed 50˚C. •...
CONTROL PANEL For more details, see control panel of your washing machine. POWER BUTTON POWER Press this button once to operate. Press once again to turn the power off. START/ START/PAUSE BUTTON PAUSE Use to pause and restart the operation. To change the washing procedure during operation, press this button to stop, and once again to restart after changing the procedure.
WASHING PROCEDURE Before starting washing, check the following; Put the laundry into the washer and add detergent, too. Connect the water supply hose to the water tap. Leave a tap Be careful not to overload. Use right detergent open. Plug the power cord in. Make sure to lay down the for the fabrics you are washing.
MANUAL FUNCTIONS Each washing course changes manually. Ex) If you want to wash in the speedy course : Power - Select speedy course - Wash - Start/Pause button Note 1. Press the POWER button to on. • WASH ONLY It water still remains after wash 2.
INSTALLATION & MAINTENANCE The User’s Manual is for common use. Make use of the User’s Manual depending upon your washing machine model. ENVIRONMENT Never install the washer near water. Leave some space Do not place the washer in steamy rooms or where the Maintain at least 10cm between the washer and the wall.
ASSEMBLING THE RAT PROTECTION PANEL 1.Insert the sound Tilt the washer a little and lift up the panel until it clicks, absorbing panel finally fix the panel with screw to the base as shown to the assembling in the figure. hole on front side to the end.
WATER SUPPLY CONNECTOR FILTER inlet water valve 1.Pull out the filter and wash well. 2. Pull in the filter and connect 3. Check if there is a leakage. the hose to the inlet water Note to tighten up the valve tightly. connector.
TROUBLESHOOTING WASHING MACHINE WON'T WORK WATER SUPPLY DOSE NOT STOP Is the water tap opened? Close the water tap. Is the washer plugged in? Disconnect the power Is the power cut off? supply card. Is there enough water? Call to service center or agency. WATER IS NOT SUPPLIED Is the water tap opened? Is the water cut off?
Page 12
IN CASE THE NEED FOR SERVICING ARISES. If any problem occurs with your products,do not hestitate to call any nearby. Name, address, telephone number is required. SPECIFICATIONS WASH 8 kg NORMAL 74 l HIGH CAPACITY SPIN 8 kg STANDARD MEDIUM 55 l DIMENSIONS(mm) W600xD660xH1010...