Advertisement
8.2 Cleaning the appliance
Clean the appliance as specified. This will ensure that
the different parts and surfaces of the appliance are
not damaged by incorrect cleaning or unsuitable clean-
ing products.
WARNING ‒ Risk of explosion!
Highly caustic alkaline or highly acidic cleaning agents
in conjunction with aluminium parts in the interior of the
appliance may cause explosions.
Never use highly caustic alkaline or highly acidic
▶
cleaning agents. In particular, do not use commer-
cial or industrial cleaning agents in conjunction with
aluminium parts, e.g. grease filter on extractor
hoods.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
Before cleaning, pull out the mains plug or switch
▶
off the fuse in the fuse box.
Do not use steam- or high-pressure cleaners to
▶
clean the appliance.
WARNING ‒ Risk of burns!
The appliance becomes hot during operation.
Allow the appliance to cool down before cleaning.
▶
WARNING ‒ Risk of injury!
Components inside the appliance may have sharp
edges.
Carefully clean the appliance interior.
▶
1.
Observe the information regarding the cleaning
agents.
→ "Cleaning products", Page 6
2.
Clean as follows, depending on the surface:
Clean stainless steel surfaces in the direction of
‒
the finish using a sponge cloth and hot soapy
water.
Clean painted surfaces using a damp sponge
‒
cloth and hot soapy water.
Clean aluminium using a soft cloth and glass
‒
cleaner.
Clean plastic using a soft cloth and glass
‒
cleaner.
Clean glass using a soft cloth and glass cleaner.
‒
3.
Dry with a soft cloth.
4.
Apply a thin layer of the stainless steel cleaning
product to stainless steel surfaces using a soft
cloth.
You can obtain stainless steel cleaning products
from the after-sales service or the online shop.
8.3 Cleaning controls and lights
WARNING ‒ Risk of electric shock!
Penetrating moisture may cause an electric shock.
Do not use wet sponge cloths.
▶
1.
Observe the information regarding the cleaning
agents.
→ "Cleaning products", Page 6
2.
Clean using a damp sponge cloth and hot soapy
water.
3.
Dry with a soft cloth.
8.4 Cleaning the magnetic mounting bracket
ATTENTION!
Magnetic mounting brackets may come loose due to
improper cleaning.
▶
Do not use any sharp or pointed objects for the
cleaning.
▶
Do not use cleaning fluids that contain adhesives.
▶
1.
Observe the information regarding the cleaning
agents.
→ "Cleaning products", Page 6
2.
Clean using a damp sponge cloth and hot soapy
water.
3.
Dry with a soft cloth.
8.5 Removing the grease filter
WARNING ‒ Risk of injury!
Risk of injury when opening and closing the hinges.
Keep your hands away from the hinges.
▶
The filter cover may swing out.
Open the filter cover slowly.
▶
Take hold of the filter cover after opening until it no
▶
longer swings out.
Close the filter cover slowly.
▶
1.
Take hold of the filter cover in the centre and open it
fully.
2.
ATTENTION!
Falling grease filters may damage the hob below.
Grip below the grease filter with one hand.
▶
Open the lock on the grease filter and fold down the
grease filter.
3.
Remove the grease filters from the holders.
To prevent grease from dripping, hold the grease fil-
ter horizontally.
Cleaning and servicing en
7
Advertisement
