Table of Contents
Advertisement
03
LEFT-HAND STALK SWITCH
Headlamp functions are controlled using the left-hand stalk
switch.
In AUTO mode, the car detects when it is dark/light and adapts the
lighting accordingly, e.g. when evening falls or when you drive into
a tunnel. Turn the stalk switch thumbwheel to
that automatically dims for oncoming traffic. Move the stalk switch
towards the instrument panel to activate main beam manually and
towards the steering wheel to deactivate.
Active bending lights* are designed to provide maximum lighting
in bends and at junctions by means of the light following steering
wheel movements. The function is activated automatically when
the car is started and can be deactivated in the centre display's
function view,
.
Approach lighting switches on the exterior and interior lighting
when you unlock the car with the key, and helps you to reach the
car safely in the dark.
Home safe lighting lights up part of the exterior lighting after you
have locked the car in order to give you some light in the dark. Acti-
vate the function after you have switched off the car by moving the
left stalk switch towards the instrument panel and then releasing it.
The time for how long the home safe lighting should remain
switched on can be set via the centre display.
Resetting the trip meter
Reset all information in the manual trip meter (TM) with a long
press on the RESET button. A short press only resets the mileage.
Trip meter, automatic (TA), is reset automatically when the car has
not been used for 4 hours.
for main beam
Advertisement
Table of Contents
