Midea MRQ23BCAST User Manual page 8

Installing the Water Line
Installing the Water Line
• Water line installaon kits are available
as an addional accessory from your
dealer or at a local hardware store.
Connecting To The Water Supply Line
1. First, shut off the main water supply line
and turn the ice-maker off.
2. Locate the nearest cold water supply
valve.
3. After connecting the water supply to
the water valve, turn your main water
of water to clear the water supply line.
Connecting the Water Line to The
Refrigerator
• There are several items that you need
to purchase to complete this connec on.
EN
•
your local hardware store.
1. First, water tubes (supplied) insert
into corresponding hole of water
connector(supplied).
2. Second, water line installation kit (not
included)inserts into another hole of
water connector (supplied).
3. Turn water valve on and check for
any leakage.
Connecting the Water Line to A
Drinkable Water Source
• If your water line is not drinkable, please
• If you must repair or disassemble the
water line, cut off the plastic tubing to
make sure you get a snug, leak-free
connection.
ATTENTION
The minimum inlet water pressure: 147KPa
The maximum inlet water pressure: 834KPa
06