Safety Precautions - Denver TVD-1410 Operation Manual

14 "(37cm)colour television with dvd player
Table of Contents

Advertisement

CAUTION: TO PREVENT ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK).NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The graphic symbols on the back cover of the set mean the following:
WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
INSTALLATION
LOCATE the receiver in the room where direct light does not strike the screen. Total darkness
or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
ALLOW enough space between the receiver and the wall to permit proper ventilation.
AVOID excessive warm locations to prevent possible damage to the cabinet or component failure.
CONNECTION
This TV power plug can be connected to 230V~ 50/60Hz, NEVER connect to DC supply or any other power.
AUTOMATIC DEGAUSSING
All colour television receivers are sensitive to magnetic influences, usually caused by either moving the receiver from one
place to another or using certain electrical appliances near the receiver. This residual magnetism as it is called, sometimes
causes distortion which gives rise to "blotchy" areas of colour in the picture. To avoid these effects the receiver incorporates
an automatic degaussing circuit which operates for a short while immediately each time the receiver is switched on using the
mains switch. This circuit removes any residual magnetism in the metal parts of the picture tube and therefore ensures that
each time the receiver is switched "ON" using the Mains switch, the purity of the colours displayed on the screen remain
true and lifelike. If the set is moved or faced in a different direction , the mains switch must be switched off at least 10 minutes
in order that the automatic degaussing circuit operates properly.
CAUTION
RISK OF ELECTRIC SHOCK
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user
to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
DO NOT OPEN
2

Advertisement

Table of Contents
loading

Table of Contents