Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HIKOKI EC36DA
Summary of Contents for HIKOKI EC36DA
- Page 1 EC36DA Handling instructions...
-
Page 5: General Power Tool Safety Warnings
c) Prevent unintentional starting. Ensure the GENERAL POWER TOOL SAFETY switch is in the off -position before connecting WARNINGS to power source and/or battery pack, picking up or carrying the tool. WARNING Carrying power tools with your fi nger on the switch Read all safety warnings, instructions, illustrations or energising power tools that have the switch on and specifi... - Page 6 h) Keep handles and grasping surfaces dry, CORDLESS AIR COMPRESSOR clean and free from oil and grease. SAFETY WARNINGS Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in 1. Don’t expose compressor to rain. Never operate unexpected situations.
- Page 7 23. Do not operate this compressor if it does not arrange for repairs by a HiKOKI authorized service contain a legible warning label. center. 24. Do not continue to use a compressor or hose that 12.
-
Page 8: Caution On Lithium-Ion Battery
39. Do not dispose of the battery in fi re. If the battery is 3. Do not use an apparently damaged or deformed burnt, it may explode. battery. 40. Bring the battery to the shop from which it was 4. Do not use the battery in reverse polarity. purchased as soon as the post-charging battery life 5. -
Page 9: Regarding Lithium-Ion Battery Transportation
USB device from the charger. Failure to do so may not only reduce the battery life of a USB device, but may also result in unexpected EC36DA: Cordless Air Compressor accidents. ○ It may not be possible to charge some USB devices, depending on the type of device. -
Page 10: Standard Accessories
Risk of Bursting NOTE Do not adjust the regulator to result in output Due to HiKOKI’s continuing program of research and pressure greater than the marked maximum development, the specifi cations herein are subject to pressure of the attachment. Do not use at a change without prior notice. -
Page 11: Know Your Air Compressor
Overload protector KNOW YOUR AIR COMPRESSOR This air compressor is equipped with a thermal overload device which will turn the air compressor off automatically, Before attempting to use this product, familiarize yourself if the air compressor becomes overheated. If the motor with all operating features and safety rules. -
Page 12: Removal And Installation Method Of Battery
REMOVAL AND INSTALLATION CHARGING METHOD OF BATTERY Before using the power tool, charge the battery as follows. 1. Connect the charger’s power cord to the ○ How to install the battery. receptacle. Align the battery with the groove in head cover and slip When connecting the plug of the charger to a it into place. - Page 13 (2) Regarding the temperatures and charging time of the rechargeable battery The temperatures and charging time will become as shown in Table 2. Table 2 Charger UC18YSL3 Type of battery Li-ion Temperatures at which the battery can be 0°C–50°C recharged Charging voltage 14.4 Multi volt...
-
Page 14: About Remaining Battery Indicator
Turning the knob fully counterclockwise operate smoothly. Have defective safety valve replaced by will completely stop the fl ow of air. a HiKOKI authorized service center. NOTE WARNING Always use the minimum amount of pressure necessary ○... -
Page 15: Operational Cautions
WARNING TRANSPORT Check the air tool manual to ensure the correct air pressure regulator setting for optimum operation ○ Turn the power switch to the OFF position. of your air tools. If you are using an air tool not ○ Remove the battery. originally included in the package contents list (not ○... -
Page 16: Selecting Accessories
fi lter and the fi lter element with compressed air. (Fig. 2) NOTE Important notice on the batteries for the HiKOKI Replace the fi lter element when it becomes dirty. cordless power tools 4. Inspection of terminals (tool and battery) -
Page 17: Troubleshooting
○ To avoid injury from an accidental start, turn the switch OFF and remove the plug from the power source or remove the battery from the main body before making any adjustments. ○ All electrical or mechanical repairs should be done only by qualifi ed service technicians. Contact HiKOKI Authorized Service Center. - Page 18 The charger’s vents are blocked, causing Avoid blocking the vents. its internal components to overheat. The cooling fan is not running. Contact a HiKOKI Authorized Service Center for repairs. The USB power lamp The battery’s capacity has become low. Replace the battery with one that has has switched off...
- Page 19 EC36DA (NN)
- Page 20 377736 BSL36..18 UC18YSL3 (14.4 V–18 V) 329897...
- Page 24 Shinagawa Intercity Tower A, 15-1, Konan 2-chome, Minato-ku, Tokyo, Japan Code No. C99742711 Printed in China...
Need help?
Do you have a question about the EC36DA and is the answer not in the manual?
Questions and answers