Installation And Adjustment - Energizer EZCP7000 Original Instructions Manual

3. Automatic Defrosting:
In heating, the machine has automatic defrosting function. After defrosting, the machine will automatically
return to the original status.
4. Overheat Protection:
To protect the service life of the machine, the machine has overheat protection in heating mode. During the
protection period, the compressor and the lower motor will stop operation and will automatically return to
normal heating state after the temperature of the machine recovers.
5. Protection Function of the Compressor
To increase the service life of the compressor, it has a 3-minute delay booting protection function after
the compressor is turned off.
V. INSTALLATION AND ADJUSTMENT
1. Installation
Warning: Before using the mobile air conditioning, keep it upright for at least two hours.
The air conditioning can be easily moved in the room. In the moving process, ensure that the air
conditioning is in the upright position and the air conditioning should be placed on a flat surface. Do not
install and use the air conditioning in the bathroom or other humid environments.
1.1 Install the exhaust pipe assembly (as shown in Fig.1)
Fig.1
1） Slide the frame into the back panel slot.
2） Insert the exhaust pipe assembly into the frame.
3）
Install then the extremity to the pipe.
1.2 Install the body
1 ） Move the machine with installed exhaust pipe to the window. The distance between the body and
walls or other objects should be least 50 cm (as shown in Fig.2)
Fig. 2
18