Saitek Cyborg evo Force User Manual page 2

Cyborg Evo Force Manual EFGIS.qxd
QUICK START GUIDE
Congratulations on purchasing the Cyborg evo Force. Please follow the
simple steps below to connect your new stick to your PC.
1. The AC adapter
Plug the plug at the end of the power cable into
the power socket of your joystick then the power
transformer into a mains power socket. It is
important that you power up your Cyborg evo
Force before connecting to your PC,
otherwise your computer will not
automatically recognise the stick.
2. The USB cable
Plug the evo Force's USB plug into one of your
PC's free USB sockets.
3. Installation of drivers, programming software,
online manual and free games
Insert the CD supplied with your Cyborg evo
Force into the CD drawer of your PC and close
the drawer. Once the PC has recognised the CD,
follow the on-screen instructions to install driver
software, access the manuals and install free
games.
Disc Contents
Your installation disc contains the following:
Drivers for the Cyborg evo Force stick
•
Installation manual for the Cyborg evo Force stick
•
Saitek Smart Technology (SST) programming software
•
SST programming manual
•
Interactive Bouncing Ball force feedback demonstration
•
Full, free version of Demonstar 2 force feedback-enabled game
•
15/07/2004 12:38 Page 2
DEMONSTAR 2 GAME SUPPORT
Please note, for all support issues relating to the Demonstar 2
game, please visit the Mountain King Studios' web site:
www.mking.com