Advertisement
Operation
Front panel
POWER SWITCH
Switch MP 11 power ON / OFF.
SD / USB SLOTS
Media player supports up to 32 GB flash storage.
LED SCREEN
LED screen displays main information about media player status:
track number and playing time, media player volume level.
PLAY/PAUSE
Start or pause player.
TRACK SKIP BUTTONS
Short press of track skip buttons will change currently playing track to previous
or next track. Long press will adjust media player volume.
MODE
Change media player source between SD / USB / FM radio / Bluetooth.
INPUT SELECTOR
Select audio source for output.
AUX INPUT
3.5 mm jack connector for external audio source.
VOLUME CONTROL
Rotary knob for adjusting output level.
04
USER MANUAL
MP 11 Media Player
BASS & TREBLE TONE CONTROLS
Tone controls provide attenuation of bass and treble response. The flat position
is obtained when the knobs are set to the middle. Turn the knob clockwise to
raise tone level +12 dB; turn counter-clockwise to lower tone level by -12 dB
MP 11
Rear panel functions
PAGING MICROPHONE INPUT
XLR connector for paging microphone.
PRIORITY AND PHANTOM POWER SWITCH
Set paging microphone input priority for output. When using condenser
microphones, switch ON phantom power.
MICROPHONE GAIN AND TONE CONTROLS
2
1
Adjust paging microphone sensitivity, bass and treble response.
3
OUTPUT CONNECTORS
Balanced Phoenix connectors in parallel to stereo RCA for connecting MP 11 to
the amplifier.
LINE INPUTS
Stereo RCA connector for external sound sources.
FM ANTENNA
FM radio antenna connector.
MAINS POWER INPUT
Connect device to mains power supply using provided power cable.
Media Player Operation
FM RADIO
AUTO-SEARCH RADIO STATIONS
Press PLAY button on front panel to automatically search all available radio
stations. Stations are stored in presets.
NAVIGATING PRESETS
After auto-search, press track skip buttons on the front panel to navigate
between stored station presets. Remote control numeric keypad also can be
used to navigate stored presets.
MANUALLY STORE RADIO STATION PRESET
Short press play button - LCD screen now blinks FM frequency.
Enter FM frequency using numeric keypad or track skip buttons.
Press play to confirm frequency - LCD screen now blinks FM preset number.
Choose new preset number using numeric keypad or track skip buttons.
Press play button to confirm and save.
SD / USB PLAYER
PLAYING MEDIA FROM SD / USB
Press PLAY button to play or pause player.
Press track skip buttons to select next or previous track.
Press REP button on the remote to repeat ONE track, or ALL tracks.
BLUETOOTH
PAIRING
In Bluetooth mode, MP 11 becomes ready to pair with another devices. When
no device is connected, screen blinks word BLUE. Search for "AMC Player" on
your device. When connected, screen stops blinking and confirmation sound
is played. Next time MP 11 will automatically connect to your device when
Bluetooth mode is selected.
UNPAIRING
Press and hold PLAY button on the front panel for a player that needs to be
unpaired from Bluetooth device.
CONTROL
Use track skip and PLAY buttons to select track and start/pause playing on
your connected Bluetooth device. This function may not work on every device
USER MANUAL
MP 11 Media Player
05
Advertisement
