LG ATNH12GRLE2 Owner's Manual page 17

Sub function - Plasma Purification
Only products with humidifying function can use this.
• Cleaning air function is additional function and it might not be indicated or operated at the partial
product.
• Cleaning air function is possible only when product is running.
• If you want independent cleaning air drive, please setup cleaning air by pressing additional drive
button at ventilation drive.
The method to setup cleaning air
Repeat pressing
1
until icon flash.
Operate or cancel Plasma
2
Purification function by pressing
button.
( icon appears/disappears on
to selection )
After setting, press
3
to exit.
❈ After setup, it automatically gets out of setup
mode if there is no button input for 25 seconds.
❈ When exiting without pressing set button, the
manipulated value is not reflected.
Operating Instructions
button
display part up
button
Owner's Manual 17