Table of Contents
Advertisement
Operation Features
Operating temperature and humidity
Mode
Cool mode
Depending on the outdoor
Heat mode
Dry mode
CAUTION
• If you use the air conditioner at a relative humidity above 80%, it may cause a formation of
condensation and a leakage of water on the floor.
• The standardized temperature for heating is 7˚C. If the outdoor temperature drops to 0˚C
or below, the heating capacity can be reduced depending on the temperature condition. If
the cooling operation is used at over 32˚C (indoor temperature), it does not cool at its full
capacity.
• If the indoor unit is out of the operating temperature and humidity range, the safery device
may operate and the air conditioner may stops.
Information about refrigerant
Important information: regulation regarding the refrigerant used
This product contains fluorinated greenhouse gases.Do not vent gases into the atmosphere.
CAUTION
If the system contains 5 tCO
for leakage at least once every 12 months, according to regulation No. 517/2014. This activity
must be covered by qualified personnel only. In the case of the situation above, the installer (or
authorized person with responsibility for final check) must provide a maintenance book, with
all the information recorded, according to REGULATION (EU) No. 517/2014 OF THE EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 16 April 2014 on fluorinated greenhouse gases.
Refrigenat type
R-32
• GWP: Global Warming Potential
• Calculating tCO
2
20
English
Outdoor temperature
unit specifications
e or more of fluorinated greenhouse gases, it must be checked
2
GWP value
675
e: kg x GWP/1000
Indoor temperature
16°C to 32°C
27°C or less
16°C to 32°C
Indoor humidity
80% or less
-
-
Advertisement
Table of Contents
