1. Manuals
  2. Brands
  3. Presys Manuals
  4. Transmitter
  5. TY-2090
  6. Technical manual

Presys TY-2090 Energy Technical Manual

Universal smart transmitter
Hide thumbs Also See for TY-2090 Energy:
Table of Contents

Advertisement

Quick Links

Download this manual
R
Universal
Universal
Universal
Smart Transmitter
Smart Transmitter
Smart Transmitter
TY-2090
Energy
TECHNICAL MANUAL
EM0319-00

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TY-2090 Energy and is the answer not in the manual?

Questions and answers

Related Manuals for Presys TY-2090 Energy

Summary of Contents for Presys TY-2090 Energy

  • Page 1 Universal Universal Universal Smart Transmitter Smart Transmitter Smart Transmitter Energy TY-2090 TECHNICAL MANUAL EM0319-00...
  • Page 2 CAUTION! In case of failure, the instrument can provide AC voltage levels in its metal box, In case of failure, the instrument can provide AC voltage levels in its metal box, In case of failure, the instrument can provide AC voltage levels in its metal box, which for safety reasons must always be connected to an effective ground point.

  • Page 3: Table Of Contents

    PRESYS  Instruments TY-2090-Energy Table of Contents 1.0 - Introduction ......................1 ..................1.1 - Description ......................1 ..................1 1 1.2 - Order Code ......................2 ..............................2 2 1.3 - Technical Specifications..................3 ........................3 3 2.0 - Installation ......................5...

  • Page 4: Introduction

    PRESYS  Instruments TY-2090-Energy 1.0 - Introduction 1.1 - Description The TY-2090-Energy transmitter is ideal for security applications in turbines, -Energy transmitter is ideal for security applications in turbines, -Energy transmitter is ideal for security applications in turbines, hydroelectric plants and thermoelectric generators. It is a microprocessor-based...

  • Page 5: Order Code

    PRESYS  Instruments TY-2090-Energy 1.2 - Order Code TY - 2090 - - - E E Field A Output 1 (Retransmission or Alarm) None 4 to 20 mAdc 1 to 5 Vdc 0 to 10 Vdc SPST Relay Open Collector Voltage...
  • Page 6 Module (if desired, specify such information so that all programming may be previously Module (if desired, specify such information so that all programming may be previously done by PRESYS). Note: Any other desired software or hardware feature may be available upon request.
  • Page 7 PRESYS  Instruments TY-2090-Energy Outputs:  Analog retransmitter output for 4-20 mA, 1 to 5 Vdc, 0 to 10 Vdc, use of Analog retransmitter output for 4-20 mA, 1 to 5 Vdc, 0 to 10 Vdc, use of Analog retransmitter output for 4-20 mA, 1 to 5 Vdc, 0 to 10 Vdc, use of...

  • Page 8: Installation

    PRESYS  Instruments TY-2090-Energy 2.0 - Installation 2.1 - Mechanical Installation The TY-2090-Energy Transmitter can be mounted on a surface or on all types of -Energy Transmitter can be mounted on a surface or on all types of -Energy Transmitter can be mounted on a surface or on all types of existing DIN rails, by means of an optional adapter, as illustrated in the figure below.

  • Page 9: Process Input Signal Connections

    PRESYS  Instruments TY-2090-Energy Fig. 3 - Transmitter terminals Fig. 3 - Transmitter terminals Fig. 3 - Transmitter terminals 2.3 - Process Input Signal Connections Process Input Signal Connections Process Input Signal Connections The Transmitter, in its two standard universal inputs, can be connected to 2 or...

  • Page 10: Rtd Connections

    PRESYS  Instruments TY-2090-Energy 2.3.1 - RTD Connections The RTD can be connected with 2, 3 or 4 wires. All connection types are shown in The RTD can be connected with 2, 3 or 4 wires. All connection types are shown in The RTD can be connected with 2, 3 or 4 wires.

  • Page 11: Current Input

    PRESYS  Instruments TY-2090-Energy 2.3.2 - Current Input A standard current source of 4 to 20 mA can be applied to terminals 1 (+) and terminals 1 (+) and terminals 1 (+) and 3 (-) in case of input 1, and to terminals 4 (+) and 6 (-) in case of input 2. Such current terminals 4 (+) and 6 (-) in case of input 2.

  • Page 12: Voltage Inputs

    PRESYS  Instruments TY-2090-Energy 2.3.3 - Voltage Inputs Voltages from 0 to 500 mVdc or from 0 to 5 Vdc must be applied to terminals Voltages from 0 to 500 mVdc or from 0 to 5 Vdc must be applied to terminals Voltages from 0 to 500 mVdc or from 0 to 5 Vdc must be applied to terminals 2 (+) and 3 (-) in case of input 1, and to terminals 5 (+) and 6 (-) in case of input 2.

  • Page 13: Output Connections

    PRESYS  Instruments TY-2090-Energy 2.4 - Output Connections The Transmitter, in its most complete version, can be provided with up to four The Transmitter, in its most complete version, can be provided with up to four The Transmitter, in its most complete version, can be provided with up to four output signals: output 1, output 2, output 3 and output 4.
  • Page 14 PRESYS  Instruments TY-2090-Energy (*)The relay contacts assume that the instrument is powered off. (*)The relay contacts assume that the instrument is (*)The relay contacts assume that the instrument is Fig. 7 - Output Connections Installation Page 11...

  • Page 15: Connection Diagram

    PRESYS  Instruments TY-2090-Energy 2.5 - Connection Diagram Installation Page 12...

  • Page 16: Communication

    PRESYS  Instruments TY-2090-Energy 2.6 - Communication The TY-2090-Energy Transmitter can communicate with computers via RS-232 or -Energy Transmitter can communicate with computers via RS-232 or -Energy Transmitter can communicate with computers via RS-232 or RS-422/485 provided the optional communication module is installed and the proper...

  • Page 17: Operation

    PRESYS  Instruments TY-2090-Energy 3.0 - Operation 3.1 - Normal Operation The TY-2090-Energy Transmitter has two operation modes: normal operation and -Energy Transmitter has two operation modes: normal operation and -Energy Transmitter has two operation modes: normal operation and operation in configuration time.
  • Page 18 PRESYS  Instruments TY-2090-Energy The normal operation mode, in which the Transmitter operates most of the time, will be called level zero. At this level, the keys on the panel of the MCY-20 Configuration Module have the following functions: Function...
  • Page 19 PRESYS  Instruments TY-2090-Energy In the operation mode it is possible to re-enable the trip alarms configured with failure manual reset (see section 3.2 - Configuration: Level 3 - Alarms) by following the procedure below: (i) The display shows a blinking B.OUT.1 / 2 mnemonic (for channel 1 / 2 with RTD (i) The display shows a blinking B.OUT.1 / 2 mnemonic (for channel 1 / 2 with RTD...

  • Page 20: Configuration

    PRESYS  Instruments TY-2090-Energy 3.2 - Configuration To have access to the configuration mode, one should provide the password To have access to the configuration mode, one should provide the password To have access to the configuration mode, one should provide the password...
  • Page 21 PRESYS  Instruments TY-2090-Energy Function SOBE Increases the digit DESCE Decreases the digit ENTER Moves to digit on the left All configuration parameters are stored in the non-volatile memory and determine All configuration parameters are stored in the non-volatile memory and determine All configuration parameters are stored in the non-volatile memory and determine the instrument normal operation.
  • Page 22 PRESYS  Instruments TY-2090-Energy The hierarchical levels are presented in sequence. The options of each level with all corresponding parameters are explained step by step. Within each level, the front panel keys of the MCY-20 Configuration Module have Configuration Module have...
  • Page 23 PRESYS  Instruments TY-2090-Energy The adjustable parameter range shown in figure 11 is given below. Mnemonic Parameter Adjustable Factory Unit Unit Unit Range Value instrument ____________ ____________ ____________ ____________ P2090 identification ____________ ____________ ____________ ____________ V.SFT software version 2.30 ____________...
  • Page 24 PRESYS  Instruments TY-2090-Energy Level 2 - Inputs Fig. 12 - INPUTS Level Options Operation Page 21...
  • Page 25 PRESYS  Instruments TY-2090-Energy The adjustable parameter range shown in figure 12 is given below. Mnemonic Parameter Adjustable Factory Unit Unit Unit Range Value LIM LOW input signal corresponding 0.0 to 100.0 20.0 to Eng Low LIM HIGH input signal corresponding 0.0 to 100.0...
  • Page 26 PRESYS  Instruments TY-2090-Energy SQRT - Shows the square root of the instrument input signal on display. The Cut- Off parameter, expressed as a % of the input signal, forces the lower value inputs (Lim Low + Cut Off) to behave as Lim Low. See illustration on figure 14: Fig.
  • Page 27 PRESYS  Instruments TY-2090-Energy UNIT - Selects ºC or ºF for temperature indication. BRK (break) - determines the change of the indication value (not shown on the BRK (break) - determines the change of the indication value (not shown on the...
  • Page 28 PRESYS  Instruments TY-2090-Energy change the relay contact to the non-alarm position for RLS, while its position would be maintained for LAST. After the proper re-connection of the sensor to the input, one must apply a reset to After the proper re-connection of the sensor to the input, one must apply a reset to...
  • Page 29 PRESYS  Instruments TY-2090-Energy Fig.15 - Relay with Delay Fig.15 - Relay with Delay Fig.15 - Relay with Delay LATCH - configures the relay to be deactivated only after the end of the alarm LATCH - configures the relay to be deactivated only after the end of the alarm LATCH - configures the relay to be deactivated only after the end of the alarm condition and the operator has performed the acknowledge of this alarm.
  • Page 30 PRESYS  Instruments TY-2090-Energy Fig. 16 - Alarm level options Fig. 16 - Alarm level options Fig. 16 - Alarm level options The table below refers to the ranges of the parameters shown in figure 16. The table below refers to the ranges of the parameters shown in figure...
  • Page 31 PRESYS  Instruments TY-2090-Energy Level 4 - Outputs Level 4 allows the configuration of two possible analog outputs (see figure 17). Level 4 allows the configuration of two possible analog outputs (see figure 17). Level 4 allows the configuration of two possible analog outputs (see figure 17).
  • Page 32 PRESYS  Instruments TY-2090-Energy INPUT - Associates analog output 1 or 2 with input 1 or 2 to be retransmitted. Notice that outputs 1 and 2 can be retransmitting the same input (1 or 2). The analog output is enabled only after the retransmission output range is...

  • Page 33: Maintenance

    PRESYS  Instruments TY-2090-Energy 4.0 - Maintenance 4.1 - Hardware The transmitter maintenance requires the user to have access to the instrument The transmitter maintenance requires the user to have access to the instrument The transmitter maintenance requires the user to have access to the instrument hardware.
  • Page 34 PRESYS  Instruments TY-2090-Energy Slide the CPU and Power Supply Boards out of the aluminum case, together with the DB-25 Terminal. Notice that both boards are united by a screwed spacer between them. Remove the screw which fastens one of the holder sides and open the boards as them.

  • Page 35: Hardware Configuration

    PRESYS  Instruments TY-2090-Energy 4.2 - Hardware Configuration The software configuration level of input (level 2 - Input) must be complemented The software configuration level of input (level 2 - Input) must be complemented The software configuration level of input (level 2 - Input) must be complemented by hardware configuration, through internal jumpers.

  • Page 36: Using Snubber With Relays 4.3 - Using Snubber With Relays

    PRESYS  Instruments TY-2090-Energy 4.3 - Using Snubber with relays Relay modules are provided with circuits for eliminating electrical arch (RC Relay modules are provided with circuits for eliminating electrical arch (RC Relay modules are provided with circuits for eliminating electrical arch (RC snubber).

  • Page 37: Optional Modules Installation

    PRESYS  Instruments TY-2090-Energy 4.4 - Optional Modules Installation The TY-2090-Energy transmitter accepts up to four output devices and -Energy transmitter accepts up to four output devices and -Energy transmitter accepts up to four output devices and communication, which must have the corresponding optional modules installed in the...
  • Page 38 PRESYS  Instruments TY-2090-Energy The connectors in the Power Supply Board are called MOD 1, MOD 2, MOD 3 and MOD 4, and are associated, in this order, to output 1, output 2, output 3 and output 4 signals, in the Indicator output terminals as shown in Figure 3. The connector for the signals, in the Indicator output terminals as shown in Figure 3.
  • Page 39 PRESYS  Instruments TY-2090-Energy In order to configure the optional analog output module for retransmission output of 4 to 20 mA, 1 to 5 V or 0 to 10 V, install the jumper according to Table 4. Retransmission Jumpers Output Types...

  • Page 40: Calibration

    PRESYS  Instruments TY-2090-Energy 4.5 - Calibration Warning: Only enter the following options after understanding them Warning: Only enter the following options after understand Warning: Only enter the following options after understand perfectly. Otherwise, it may be necessary to return the instrument to the factory for perfectly.
  • Page 41 PRESYS  Instruments TY-2090-Energy After performing all references on the table related to the input type to be calibrated, the calibration process will be finished. It is possible to recalibrate only one point, without affecting the other points It is possible to recalibrate only one point, without affecting the other points It is possible to recalibrate only one point, without affecting the other points already calibrated, in case the calibration of this point was not carried out properly.
  • Page 42 PRESYS  Instruments TY-2090-Energy Calibration of Voltage Input (0 to 500 mV) In order to calibrate a voltage input from 0 to 500 mV, connect an accurate In order to calibrate a voltage input from 0 to 500 mV, connect an accurate...
  • Page 43 PRESYS  Instruments TY-2090-Energy Calibration of Current Input (0 to 20 mA) In order to calibrate a current input from 0 to 20 mA, connect an accurate current In order to calibrate a current input from 0 to 20 mA, connect an accurate current...
  • Page 44 PRESYS  Instruments TY-2090-Energy Output type Output 1 with Input 1 Output 2 with Input 2 current (0 to 20 mA) terminal 13 (+) with 1 (+) terminal 15 (+) with 4 (+) terminal 15 (+) with 4 (+) terminal 15 (+) with 4 (+)

  • Page 45: Hardware Maintenance Instructions

    PRESYS  Instruments TY-2090-Energy 4.6 - Hardware Maintenance Instructions Before sending the instrument back to factory check the following probable Before sending the instrument back to factory check the following probable Before sending the instrument back to factory check the following probable...
  • Page 46 PRESYS  Instruments TY-2090-Energy Test points on flat cable 1 Voltage Between point 1(-) and point 2(+) Between point 9(-) and point 8(+) Between point 9(-) and point 1(+) Between point 9(-) and point 10(+) - 8 V - - 8 V...

  • Page 47: Hardware Maintenance Instructions Nstructions 4.7 - List Of Components 4.7 - List Of Components

    PRESYS  Instruments TY-2090-Energy 4.7 - List of Components Power Supply Board Code Components Reference Reference Reference 01.05.0046-20 Power Supply Board --------------------- --------------------- --------------------- 01.01.0029-21 LM 2940CT - 5,0 V 01.01.0003-21 LM 1458 01.01.0030-21 UC 3842 01.09.0015-21 Transistor BC 337 01.09.0019-21...
  • Page 48 PRESYS  Instruments TY-2090-Energy CPU Board Code Components Reference Reference Reference 01.05.0048-20 CPU Board ----------------------- ----------------------- ----------------------- 01.01.0007-21 LM 311 U 18 01.01.0016-21 EPROM 27C512 01.01.0050-21 MB84256-10L-SK 01.01.0044-21 E2PROM X25C43P U 19 U 19 U 19 01.01.0034-21 NVRAM X24C45P 01.01.0019-21...
  • Page 49 PRESYS  Instruments TY-2090-Energy I/O Terminal Board Code Components Reference 01.05.0049-20 I/O Terminal Board --------------------- 01.09.0015-21 BC 337 01.13.0002-21 Terminal TS 504-3 CN 1, 2 01.13.0003-21 Female Connector 26 - ES31B213 P 1, 2 Analog Output Board Code Components Reference...

  • Page 50: List Of Recommended Spare Components

    PRESYS  Instruments TY-2090-Energy 4.8 - List of Recommended Spare Components Power Supply Board IRF 822 UC-3842 Fuse 2A LM-1458N I/O Terminal Board BC 337 CPU Board 4051 U 14 4053 U 15 LM-336/5V Engineering Units Label Code: 02.10.0003-21 Maintenance...

  • Page 51: Modbus Communication

    PRESYS  Instrumentos e Sistemas TY-2090-Energy 5.0 - MODBUS Communication Specific information about communication and connection of the signals is Specific information about communication and connection of the signals Specific information about communication and connection of the signals described in the communication manual.
  • Page 52 PRESYS  Instrumentos e Sistemas TY-2090-Energy 18 Number of decimals for channel 2 See register 17 19 Temperature unit of channel 1 (UNIT mnemonic) 0 - Celsius degree Celsius degree Celsius degree 1 - Fahrenheit degree Fahrenheit degree Fahrenheit degree...
  • Page 53 PRESYS  Instrumentos e Sistemas TY-2090-Energy 64 Setpoint of channel 2 low alarm associated with relay 2 -1009 to 20019 E.U. channel 2 65 Setpoint of channel 1 high alarm associated with relay 3 -1009 to 20019 E.U. 1009 to 20019 E.U.
  • Page 54 PRESYS  Instrumentos e Sistemas TY-2090-Energy 102 Low limit of output 1 retransmission signal (LIM LOW 0.0 to 100.0 % (iv) mnemonic from OUTPUT level) 103 High limit of output 2 retransmission signal (LIM HIGH 0.0 to 100.0 % (iv) 0.0 to 100.0 % (iv)

  • Page 55: List Of Modbus Communication Registers 5.2 - List Of Communication Coils 5.2 - List Of Communication Coils

    PRESYS  Instrumentos e Sistemas TY-2090-Energy 5.2 - List of Communication Coils The table below lists all coils found in TY-2090-Energy. Coils Enables password by value (VALUE mnemonic) Enables password by key (KEY mnemonic) Enables safety condition of relay 1 (SAFE mnemonic)
  • Page 56 PRESYS  Instrumentos e Sistemas TY-2090-Energy Enables channel 1 failure alarm associated with relay 1 Enables channel 1 failure alarm associated with relay 2 Enables channel 1 failure alarm associated with relay 3 Enables channel 1 failure alarm associated with relay 4...
  • Page 57 www.presyscorp.com...

Table of Contents